Linksys WRT54G v8.1
From DD-WRT Wiki
(Difference between revisions)
Revision as of 10:46, 30 April 2010 (edit) Glenn (Talk | contribs) (catchg Category:Linksys guides) ← Previous diff |
Current revision (14:18, 24 March 2018) (edit) (undo) Ian5142 (Talk | contribs) (Added to Linksys Category.) |
||
Line 1: | Line 1: | ||
+ | ==Introduction== | ||
<font color=red><big>'''NOTE:'''</big></font> '''During configuration or flashing a device, the only that should be hooked to the device is the computer and power.'''<br> | <font color=red><big>'''NOTE:'''</big></font> '''During configuration or flashing a device, the only that should be hooked to the device is the computer and power.'''<br> | ||
Line 6: | Line 7: | ||
[[Category:Linksys guides]] | [[Category:Linksys guides]] | ||
+ | [[Category:Linksys]] |
Current revision
[edit] Introduction
NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.
The WRT54Gv8.1 router already has a Linux CFE in the flash. There is no need for running any prep or killer file before the initial flash.
This model also has a 128K compressed CFE so it will load micro_plus and micro_plus_ssh directly. Initial flashing of this model requires a modified file with the proper header. You can obtain this file here. After this file is loaded you can then upgrade to any micro_generic.bin file....or one of the micro_plus, micro_plus_ssh mentioned above.