Linksys WRT54G v8.1

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 06:44, 28 December 2009 (edit)
DHC DarkShadow (Talk | contribs)

← Previous diff
Revision as of 15:58, 21 February 2010 (edit) (undo)
DHC DarkShadow (Talk | contribs)

Next diff →
Line 1: Line 1:
 +<font color=red><big>'''NOTE:'''</big></font> '''During configuration or flashing a device, the only that should be hooked to the device is the computer and power.'''<br>
 +
The WRT54Gv8.1 router already has a Linux CFE in the flash. There is no need for running any prep or killer file before the initial flash. The WRT54Gv8.1 router already has a Linux CFE in the flash. There is no need for running any prep or killer file before the initial flash.

Revision as of 15:58, 21 February 2010

NOTE: During configuration or flashing a device, the only that should be hooked to the device is the computer and power.

The WRT54Gv8.1 router already has a Linux CFE in the flash. There is no need for running any prep or killer file before the initial flash.

This model also has a 128K compressed CFE so it will load micro_plus and micro_plus_ssh directly. Initial flashing of this model requires a modified file with the proper header. You can obtain this file here. After this file is loaded you can then upgrade to any micro_generic.bin file....or one of the micro_plus, micro_plus_ssh mentioned above.