Linksys WRT54G v3.0
From DD-WRT Wiki
(Difference between revisions)
Revision as of 15:57, 6 November 2017 (edit) Jeremywh7 (Talk | contribs) (→Updated Flashing Instructions) ← Previous diff |
Revision as of 16:09, 6 November 2017 (edit) (undo) Jeremywh7 (Talk | contribs) (→Initial Flash) Next diff → |
||
Line 2: | Line 2: | ||
<font color=red><big>'''NOTE:'''</big></font> '''During device flash, it is recommended to connect the router to the computer only, via ethernet, and to clear the internet browser cache. Alternatively, pressing Ctrl-F5 will force a cache-bypass refresh of the current page.'''<br> | <font color=red><big>'''NOTE:'''</big></font> '''During device flash, it is recommended to connect the router to the computer only, via ethernet, and to clear the internet browser cache. Alternatively, pressing Ctrl-F5 will force a cache-bypass refresh of the current page.'''<br> | ||
- | + | * Carefully read the [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486 Peacock announcement] in the Broadcom forum | |
- | + | * Download the [ftp://ftp.dd-wrt.com/betas/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54g.bin trailed 14929 mini build] ([https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54g.bin https]) | |
- | + | # Restore factory defaults in the Linksys firmware. | |
+ | # Go to the tab Administration > Firmware Upgrade and select the downloaded trailed 14929 mini build | ||
# '''Wait for five minutes''' | # '''Wait for five minutes''' | ||
# Login to the DD-WRT GUI at [http://192.168.1.1 192.168.1.1] | # Login to the DD-WRT GUI at [http://192.168.1.1 192.168.1.1] |
Revision as of 16:09, 6 November 2017
Initial Flash
NOTE: During device flash, it is recommended to connect the router to the computer only, via ethernet, and to clear the internet browser cache. Alternatively, pressing Ctrl-F5 will force a cache-bypass refresh of the current page.
- Carefully read the Peacock announcement in the Broadcom forum
- Download the trailed 14929 mini build (https)
- Restore factory defaults in the Linksys firmware.
- Go to the tab Administration > Firmware Upgrade and select the downloaded trailed 14929 mini build
- Wait for five minutes
- Login to the DD-WRT GUI at 192.168.1.1
- Do a Factory Defaults (GUI) or hard reset
- Wait until you can again login at 192.168.1.1
- If problems are encountered, upgrade to latest firmware for WRT54Gv3 and retry
Updating DD-WRT Firmware
- Refer to the Peacock announcement for recommended builds. Do not use the Router Database.
- For newer builds, refer to "New Build" threads, or those specific to this model.
- This can run any broadcom folder build except mega. Do not use k26 nor k3x.
- It is recommended to reset prior to flashing. Administration > Factory Defaults
- Go to the DD-WRT Administration -> Firmware Upgrade page and select the downloaded firmware
- Wait six minutes to flash
- Reset after flashing.
- Access the dd-wrt GUI at 192.168.1.1, set a username and password