Linksys WRT54GS v2.0
From DD-WRT Wiki
(Difference between revisions)
Revision as of 06:21, 15 June 2011 (edit) Markus (Talk | contribs) ← Previous diff |
Revision as of 19:17, 1 May 2020 (edit) (undo) Jeremywh7 (Talk | contribs) m (→Upgrade Flash - forgot to specify upgrade file type) Next diff → |
||
(13 intermediate revisions not shown.) | |||
Line 1: | Line 1: | ||
- | == | + | ==WRT54GS v2.0 [http://techinfodepot.shoutwiki.com/wiki/Linksys_WRT54GS_v2.0 Specs]== |
+ | *Chipset: BCM4712 | ||
+ | *Ram: 32 MB | ||
+ | *Flash: 8 MB | ||
- | == '''WRT54GS v2''' == | ||
- | '''Chipset - BCM4712 -- Ram - 32mb -- Flash - 8mb''' | ||
- | + | ==How To Flash== | |
- | + | Read the [[Firmware FAQ]] and Broadcom forum build threads '''before upgrading!''' | |
- | + | #Use GUI or [[TFTP flash]] with a wired connection. Disable wireless to be safe. | |
+ | #'''DO NOT 30/30/30 HARD RESET''' this model as this could brick your router. See the [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486 Peacock Announcement] Note 1. | ||
- | '''Initial Flash-''' | ||
- | + | ==Initial Flash== | |
- | * ''' '' | + | Download ''[https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin Build 14929 dd-wrt.v24_mini_wrt54gs.bin]'' |
+ | #'''Reset''' by keeping the router powered on and holding the reset button until the lights flash (up to 30sec) | ||
+ | #Open 192.168.1.1 in a web browser (if issues are encountered, try another browser) | ||
+ | #*User = (Leave Blank) | ||
+ | #*Password = admin | ||
+ | #*''If this does not work, '''see the above reset info''' to restore to factory defaults. | ||
+ | #Check the firmware version in the top right corner to be 4.71.4, otherwise flash: | ||
+ | #*''[https://dd-wrt.com/phpBB2/download.php?id=20701 WRT54GS_4.71.4.001_fw.2.bin]'' (factory firmware was removed by Linksys) | ||
+ | #*'''DO NOT flash this to a WRT54GSv1''' | ||
+ | #Go to ''Administration'' -> ''Factory Defaults'' -> ''Restore'' -> ''Apply Settings'' to flash ''dd-wrt.v24_mini_wrt54gs.bin'' | ||
+ | #*'''Wait 5 minutes for the router to reboot''' | ||
+ | #*If no response, unplug the router for 10 seconds then plug it back in | ||
+ | #Access the GUI to set a password | ||
- | Also download this VINT File: ftp://dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/dd-wrt.v24-13491_VINT_mini.bin | ||
- | ''' | + | ==Upgrade Flash== |
- | # | + | #Any ''generic.bin'' '''/broadcom folder''' build will work under 7995392 bytes (7808KB) |
- | # | + | #*See [[What_is_DD-WRT%3F#K2.4_Build_Features|K2.4 Build Features]] for file type differences. '''Read build threads first!''' |
- | # | + | #Go to ''Administration'' -> ''Firmware Upgrade'' to select the file to ''Upgrade'' |
- | + | #Wait 5 minutes for the router to reboot (power cycle if needed) then '''reset''' | |
- | # | + | #Access the GUI to set a password and configure |
- | '''FLASHING''' | ||
- | '''At this time the only thing connected to the router is the Power and Ethernet to PC''' | ||
- | '''The Steps Listed Below Are For Flashing via the Web GUI - NOT TFTP" | ||
- | + | [[Category:Linksys guides]] | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + |
Revision as of 19:17, 1 May 2020
Contents |
WRT54GS v2.0 Specs
- Chipset: BCM4712
- Ram: 32 MB
- Flash: 8 MB
How To Flash
Read the Firmware FAQ and Broadcom forum build threads before upgrading!
- Use GUI or TFTP flash with a wired connection. Disable wireless to be safe.
- DO NOT 30/30/30 HARD RESET this model as this could brick your router. See the Peacock Announcement Note 1.
Initial Flash
Download Build 14929 dd-wrt.v24_mini_wrt54gs.bin
- Reset by keeping the router powered on and holding the reset button until the lights flash (up to 30sec)
- Open 192.168.1.1 in a web browser (if issues are encountered, try another browser)
- User = (Leave Blank)
- Password = admin
- If this does not work, see the above reset info to restore to factory defaults.
- Check the firmware version in the top right corner to be 4.71.4, otherwise flash:
- WRT54GS_4.71.4.001_fw.2.bin (factory firmware was removed by Linksys)
- DO NOT flash this to a WRT54GSv1
- Go to Administration -> Factory Defaults -> Restore -> Apply Settings to flash dd-wrt.v24_mini_wrt54gs.bin
- Wait 5 minutes for the router to reboot
- If no response, unplug the router for 10 seconds then plug it back in
- Access the GUI to set a password
Upgrade Flash
- Any generic.bin /broadcom folder build will work under 7995392 bytes (7808KB)
- See K2.4 Build Features for file type differences. Read build threads first!
- Go to Administration -> Firmware Upgrade to select the file to Upgrade
- Wait 5 minutes for the router to reboot (power cycle if needed) then reset
- Access the GUI to set a password and configure