Linksys WRT54GS v2.0

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 01:30, 13 October 2009 (edit)
DHC DarkShadow (Talk | contribs)
(How To Flash)
← Previous diff
Revision as of 03:06, 19 August 2014 (edit) (undo)
Ghz24 (Talk | contribs)
(Other Notes)
Next diff →
(26 intermediate revisions not shown.)
Line 1: Line 1:
== How To Flash == == How To Flash ==
-Need confirmed instructions posted 
-== Other Notes ==+ == '''WRT54GS v2''' ==
 + '''Chipset - BCM4712 -- Ram - 32mb -- Flash - 8mb'''
-''[comment added 3/23/08 by Bugman916]''+ '''As of 3/2/11 these are the following files you will need to flash dd-wrt to your WRT54GS v2 router. '''
-Just installed dd-wrt on my WRT54GS v2.0 router. I started with RC 6.2 dd-wrt.v24_mini_wrt54gs through the Linksys interface. Then I used the new dd-wrt mini interface to install RC6.2 dd-wrt.v24_std_generic. Everything seems "ok", I had no problems getting firmware installed. + ''Factory Firmware - [http://homedownloads.cisco.com/downloads/firmware/WRT54GSv3_4.71.4.001_fw.bin WRT54GSv3_4.71.4.001_fw.bin]''' This file has been removed by linksys but Redhawk0 posted this
-'''reminder''' Default login/pw .. root/admin+ link elsewhere http://www.dd-wrt.com/phpBB2/download.php?id=20701&sid=9e3af0c0fed09f1eeef7e263524ba33b
 +* ''' ''Be aware that applying the firmware update WRT54GSv3_4.71.4.001_fw.bin to Version 1.0 WRT54GS routers can Kill your router.'' '''
-I had no trouble installing dd-wrt.v24_std_generic.bin onto my v2 WRT54GS. I didn't need to install mini first, didn't need to play with FTP, just installed it via the firmware update page. It worked without using the reset button. <BR>[[User:Jax184|Jax184]] 07:42, 15 June 2008 (CEST)+'''Initial Flash-'''
-''[comment added 7/18/08 by koolkat]''+* ''' '' If you are going to Flash via TFP: [ ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin dd-wrt.v24_mini_wrt54gs.bin]'' '''
-Does NOT need VxWorks killer to install due to the fact that factory firmware is linux based.+* ''' ''If you are going to Flash via the Web GUI: [ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin dd-wrt.v24_mini_wrt54gs.bin]'' '''
-Installed VINTage Mega firmware after installing VINTage standard, had no problems at all.+
-"[comment added 10/05/08 by mikeandmonika]"+Also download this VINT File: ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/dd-wrt.v24-13491_VINT_mini.bin
-Installed DD-WRT v24-sp1 (07/26/08) mega-special (upgraded from HyperWRT through GUI). Upgrade took approximately 20 minutes to complete, but all is well and working great.+
-''[comment added 12/20/08 by Corehop]''+''' Before we begin, make sure you have done the following: '''
-Successfully installed dd-wrt.v24-9517_VINT_std.bin from factory linksys web GUI. Then tried upgrading to dd-wrt.v24-9517_VINT_mega.bin using the DDWRT web GUI, but when the router reset, it would not respond to pings and I had to short pins 15 and 16 on the flash chip and TFTP the Linksys firmware.+# Turned off your Anti-Virus & Firewall
 +#Turned off your Wireless Connections
 +#Use IE to flash via the Web GUI and not Firefox, as some users have issues with Firefox
 +#'''DO NOT Do a 30/30/30 HARD RESET''' - Good Chance you will brick your router. See the peacock announcement, note 1 for further information on this.
 +##Do a '''Reset''' by keeping the router powered on and holding the reset button on the back for 30 seconds
-Comment [[User:galengish|galengish]] at 10:34 (EST) on 06 Jan 2009: I flashed a Linksys WRT54GS v2 router last night from original firmware to DD_WRT v24 (05/20/2008) std in one shot. This was performed via Internet Explorer and the Web GUI via Ethernet cable. The flash was successful on the first try and it is now successfully working as a client-bridge with another WRT54GS v7 running original Linksys firmware.+ '''FLASHING'''
 + '''At this time the only thing connected to the router is the Power and Ethernet to PC'''
 + '''The Steps Listed Below Are For Flashing via the Web GUI - NOT TFTP"
-Comment [[User:Milkman|Milkman]] at 8:47 (CST) on 26 Mar 2009: I just installed v24-sp1 mega from the Linksys firmware and it seems to have installed without a hitch, although I haven't had a chance to play around much yet. It is indicating "Error" on the title bar in my browser, but this may be associated with the lack of WAN connectivity for the router at this point. Will update should I find any significant errors/problems. (I hope I get the formatting correct here, please bear with me as I am new to wiki submissions)+# '''READ the Peacock Announcement prior to flashing: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486'''
 +# '''Open IE and enter the following address: 192.168.1.1'''
 +##User = (Leave Blank)
 +##Password = admin
 +###''If you don't know the Login Info, '''Do a Reset.''' This will restore the router back to factory defaults.''
 +# '''Look at the top Right Corner and make sure your Firmware is at 4.71.4'''
 +## If your Firmware IS up to date, Go to: Administration > Factory Defaults > Restore > Apply Settings
 +### ''Wait 5 minutes for the Router to Re-boot''
 +## If your Firmware is NOT up to date, Go to: Administration > Firmware Upgrade (select the 4.71.4 file that you saved from above) > Upgrade
 +### ''Wait 5 minutes for the Router to Re-boot''
 +# '''Reset'''
 +# '''Open IE and enter the following address: 192.168.1.1 and Login with the Default Info in Step 1'''
 +# '''Go to: Administration > Firmware Upgrade (''select the dd-wrt.v24_mini_wrt54gs.bin'') > Upgrade'''
 +## Wait 5 minutes for the Router to Re-boot
 +#'''Reset'''
 +#'''Power Cycle (Unplug the Router from the power and wait 10 seconds before you plug it back in'''
 +#'''Open IE and enter the following address: 192.168.1.1'''
 +##User = root
 +##Password = admin
 +###''You don't need to enter new Login info yet since you will be flashing a different version of dd-wrt and will need to set it once you are done with the next flash''
 +#'''Go to: Administration > Firmware Upgrade (''select the VINT file you downloaded earlier ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/dd-wrt.v24-13491_VINT_mini.bin'') > Upgrade'''
 +#'''Wait 5 minutes for the Router to Re-boot'''
 +#'''Reset'''
 +#'''Power Cycle'''
 +#'''Open IE and enter the following address: 192.168.1.1'''
 +#'''Enter a New User Name and Password'''
 +#'''Now you can enjoy your DD-WRT Firmware and change the settings you need to change'''
 + 
 +If you wish to use another version of dd-wrt follow the same steps you followed for flashing the VINT file. You can use Vint_Mini, Vint_Std or Vint_Mega on this router. Here is a link to the VINT files: ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/
 + 
 +== Other Notes ==
-Updated 10 Apr 2009: OK, backing up to v24 doesn't cause the "error" reporting on the browser, seems to be something with the SP1 release. Haven't checked change logs, but seems very happy with v24 mega.+Outdated comments removed May 12, 2011.
-[[Category: Linksys]]+Comment [[User:ghz24|ghz24]] August 2014:Regardless of warnings firefox/ubuntu 14.10 performed flash flawlessly.
 +[[Category:Linksys guides]]

Revision as of 03:06, 19 August 2014

How To Flash

                                                              == WRT54GS v2 ==
                                       Chipset - BCM4712  --  Ram - 32mb  --  Flash - 8mb
  As of 3/2/11 these are the following files you will need to flash dd-wrt to your WRT54GS v2 router. 
 Factory Firmware - WRT54GSv3_4.71.4.001_fw.bin'      This file has been removed by linksys but Redhawk0 posted this
link elsewhere http://www.dd-wrt.com/phpBB2/download.php?id=20701&sid=9e3af0c0fed09f1eeef7e263524ba33b
  • Be aware that applying the firmware update WRT54GSv3_4.71.4.001_fw.bin to Version 1.0 WRT54GS routers can Kill your router.

Initial Flash-

Also download this VINT File: ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/dd-wrt.v24-13491_VINT_mini.bin

Before we begin, make sure you have done the following:

  1. Turned off your Anti-Virus & Firewall
  2. Turned off your Wireless Connections
  3. Use IE to flash via the Web GUI and not Firefox, as some users have issues with Firefox
  4. DO NOT Do a 30/30/30 HARD RESET - Good Chance you will brick your router. See the peacock announcement, note 1 for further information on this.
    1. Do a Reset by keeping the router powered on and holding the reset button on the back for 30 seconds
                                                                 FLASHING
               At this time the only thing connected to the router is the Power and Ethernet to PC
                        The Steps Listed Below Are For Flashing via the Web GUI - NOT TFTP"
  1. READ the Peacock Announcement prior to flashing: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486
  2. Open IE and enter the following address: 192.168.1.1
    1. User = (Leave Blank)
    2. Password = admin
      1. If you don't know the Login Info, Do a Reset. This will restore the router back to factory defaults.
  3. Look at the top Right Corner and make sure your Firmware is at 4.71.4
    1. If your Firmware IS up to date, Go to: Administration > Factory Defaults > Restore > Apply Settings
      1. Wait 5 minutes for the Router to Re-boot
    2. If your Firmware is NOT up to date, Go to: Administration > Firmware Upgrade (select the 4.71.4 file that you saved from above) > Upgrade
      1. Wait 5 minutes for the Router to Re-boot
  4. Reset
  5. Open IE and enter the following address: 192.168.1.1 and Login with the Default Info in Step 1
  6. Go to: Administration > Firmware Upgrade (select the dd-wrt.v24_mini_wrt54gs.bin) > Upgrade
    1. Wait 5 minutes for the Router to Re-boot
  7. Reset
  8. Power Cycle (Unplug the Router from the power and wait 10 seconds before you plug it back in
  9. Open IE and enter the following address: 192.168.1.1
    1. User = root
    2. Password = admin
      1. You don't need to enter new Login info yet since you will be flashing a different version of dd-wrt and will need to set it once you are done with the next flash
  10. Go to: Administration > Firmware Upgrade (select the VINT file you downloaded earlier ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/dd-wrt.v24-13491_VINT_mini.bin) > Upgrade
  11. Wait 5 minutes for the Router to Re-boot
  12. Reset
  13. Power Cycle
  14. Open IE and enter the following address: 192.168.1.1
  15. Enter a New User Name and Password
  16. Now you can enjoy your DD-WRT Firmware and change the settings you need to change

If you wish to use another version of dd-wrt follow the same steps you followed for flashing the VINT file. You can use Vint_Mini, Vint_Std or Vint_Mega on this router. Here is a link to the VINT files: ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn13491-snow/VINT/

Other Notes

Outdated comments removed May 12, 2011.

Comment ghz24 August 2014:Regardless of warnings firefox/ubuntu 14.10 performed flash flawlessly.