Linksys WRT54GS v1.0

From DD-WRT Wiki

Revision as of 07:18, 12 February 2010 by Cpirner (Talk | contribs)
Jump to: navigation, search

How To Flash

Need confirmed instructions posted

Other Notes

I installed dd-wrt.v24-13064_VINT_std.bin directly from Linksys web interface (v4.7 something) using the standard process.

  1. 30-30-30 Hard Reset (no forced password reset from orig Linksys firmware)
  2. Use firmware update page.......wait...wait...wiat
  3. reboot....wait....wait...wait
  4. 30-30-30 Hard Reset (forced password reset from new dd-wrt firmware)
  5. Configure ppoe, connect to DSL modem in bridged mode, enjoy

Getting great signal to my wireless clients and playing around with all my new features



[comment added 17/05/08 by 7E0D1450] I installed dd-wrt.v24-9433_VINT_mega.bin directly from Linksys Web Interface (Firmware version 2.07.1) without problems or issues. The procedure is:

   1. Hard Reset (press for 30 secs the reset button - IMPORTANT).
   2. Upload the firmware from Linksys Web Interface.
   3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT).

Reference in dd-wrt forum: [1]

____________________________________________ [comment added 18/03/09 by fattrain] I installed dd-wrt.v24-9517_VINT_std.bin directly from Linksys Web Interface (Firmware version Ver.4.71.4) without problems or issues. The procedure is:

   1. Hard Reset (press for 30 secs the reset button - IMPORTANT).
   2. Upload the firmware from Linksys Web Interface.
   3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT).

Enjoy! :-)