Linksys WRT54GS v1.0
From DD-WRT Wiki
(Difference between revisions)
Revision as of 16:48, 3 December 2014 (edit) Donny (Talk | contribs) (→How To Flash - Revised and simplified inadequate instructions) ← Previous diff |
Revision as of 16:49, 3 December 2014 (edit) (undo) Donny (Talk | contribs) (→Other Notes) Next diff → |
||
Line 19: | Line 19: | ||
Start by going to 192.168.1.1. with your web browser and TYPING in a user name and passphrase. Do NOT ever save these with the web browser. | Start by going to 192.168.1.1. with your web browser and TYPING in a user name and passphrase. Do NOT ever save these with the web browser. | ||
- | == Other Notes == | ||
- | I installed dd-wrt.v24-13064_VINT_std.bin directly from Linksys web interface (v4.7 something) using the standard process. | ||
- | 1. 30-30-30 Hard Reset (no forced password reset from orig Linksys firmware) | ||
- | 2. Use firmware update page.......wait...wait...wiat | ||
- | 3. reboot....wait....wait...wait | ||
- | 4. 30-30-30 Hard Reset (forced password reset from new dd-wrt firmware) | ||
- | 5. Configure ppoe, connect to DSL modem in bridged mode, enjoy | ||
- | Getting great signal to my wireless clients and playing around with all my new features | ||
- | ----------------------------------------- | ||
- | |||
- | |||
- | ''[comment added 17/05/08 by 7E0D1450]'' | ||
- | I installed dd-wrt.v24-9433_VINT_mega.bin directly from Linksys Web Interface (Firmware version 2.07.1) without problems or issues. The procedure is: | ||
- | |||
- | 1. Hard Reset (press for 30 secs the reset button - IMPORTANT). | ||
- | 2. Upload the firmware from Linksys Web Interface. | ||
- | 3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT). | ||
- | |||
- | Reference in dd-wrt forum: [http://www.dd-wrt.com/phpBB2/viewtopic.php?p=174543&highlight=#174543] | ||
- | |||
- | ----------------------------------------- | ||
- | |||
- | ''[comment added 01-08-2010 by DJJB]'' | ||
- | I tried to install the mega pack as well through the Linksys Web Interface. Did the resets even the 30-30-30 way, but it bricked my router. The power LED flashes fast and the DMZ sometimes comes up for about 5 seconds. When pinging TTL=100, but doesn't respond to the TFTP-tool anymore. | ||
- | |||
- | If it's safer to install the mini version first, you might want to do that first to take less chances... | ||
- | |||
- | ----------------------------------------- | ||
- | |||
- | ''[comment added 18/03/09 by fattrain]'' | ||
- | I installed dd-wrt.v24-9517_VINT_std.bin directly from Linksys Web Interface (Firmware version Ver.4.71.4) without problems or issues. The procedure is: | ||
- | |||
- | 1. Hard Reset (press for 30 secs the reset button - IMPORTANT). | ||
- | 2. Upload the firmware from Linksys Web Interface. | ||
- | 3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT). | ||
- | |||
- | Enjoy! :-) | ||
[[Category: Linksys]] | [[Category: Linksys]] |
Revision as of 16:49, 3 December 2014
How To Flash
CONFIRMED INSTRUCTIONS:
Initial Flashing:
- Read the peacock announcement at the top of the broadcom forum!
- Device had the original Linksys firmware on it.
- Connected power and Ethernet cable to the router.
- 30-30-30 Hard Reset.
- Waited until lights returned to normal (longer is better).
- There is A LOT of WAITING. Cannot emphasize that enough. Waiting is the key. **
- Connected to http://192.168.1.1 using Internet Explorer.
- Download this file: ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin
- Go to the firmware upgrade page and upgrade the router to the file you downloaded in the previous setp
- Wait at least five full earth minutes AND until you get until Upgrade Successful message and lights returned to normal.
- Do a 30-30-30 Hard Reset.
Now you can can begin configuring your router.
Start by going to 192.168.1.1. with your web browser and TYPING in a user name and passphrase. Do NOT ever save these with the web browser.