Linksys WRT54GS v1.0

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:58, 29 September 2009 (edit)
DHC DarkShadow (Talk | contribs)

← Previous diff
Current revision (16:50, 3 December 2014) (edit) (undo)
Donny (Talk | contribs)
(How To Flash)
 
(20 intermediate revisions not shown.)
Line 1: Line 1:
== How To Flash == == How To Flash ==
 +CONFIRMED INSTRUCTIONS:
 +'''Initial Flashing:'''<br>
 +#Read the peacock announcement at the top of the broadcom forum!
 +#Device had the original Linksys firmware on it.
 +#Connected power and Ethernet cable to the router.
 +# Reset the router to defaults using the reset button.
 +#Waited until lights returned to normal (longer is better).
 +#** There is A LOT of WAITING. Cannot emphasize that enough. Waiting is the key. **
 +#Connected to http://192.168.1.1 using Internet Explorer.
 +#Download this file: ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin
 +#Go to the firmware upgrade page and upgrade the router to the file you downloaded in the previous setp
 +# Wait at least five full earth minutes AND until you get until Upgrade Successful message and lights returned to normal.
 +'''
 +Now you can can begin configuring your router.<br>
 +Start by going to 192.168.1.1. with your web browser and TYPING in a user name and passphrase. Do NOT ever save these with the web browser.
-== JTAG Recovery == 
-JTAG: 
-#Erase Wholeflash x2 
-#Flash CFE 
-#Unplug Power 
-#Unplug JTAG Cable 
- 
-TFTP 
- 
-#Set Rig ip static 192.168.1.10 
-#Plug network cable from rig to port 1 
-#Plug in power 
-#Wait for DMZ light to do a steady pulse, When it is lit on the 3rd time click upgrade. The DMZ light must be lit when you click upgrade. 
-#Hard Reset 30\30\30  
- 
- 
-== Other Notes == 
- 
-''[comment added 17/05/08 by 7E0D1450]'' 
-I installed dd-wrt.v24-9433_VINT_mega.bin directly from Linksys Web Interface (Firmware version 2.07.1) without problems or issues. The procedure is: 
- 
- 1. Hard Reset (press for 30 secs the reset button - IMPORTANT). 
- 2. Upload the firmware from Linksys Web Interface. 
- 3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT). 
- 
-Reference in dd-wrt forum: [http://www.dd-wrt.com/phpBB2/viewtopic.php?p=174543&highlight=#174543] 
- 
-____________________________________________ 
-''[comment added 18/03/09 by fattrain]'' 
-I installed dd-wrt.v24-9517_VINT_std.bin directly from Linksys Web Interface (Firmware version Ver.4.71.4) without problems or issues. The procedure is: 
- 
- 1. Hard Reset (press for 30 secs the reset button - IMPORTANT). 
- 2. Upload the firmware from Linksys Web Interface. 
- 3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT). 
- 
-Enjoy! :-) 
[[Category: Linksys]] [[Category: Linksys]]

Current revision

[edit] How To Flash

CONFIRMED INSTRUCTIONS:

Initial Flashing:

  1. Read the peacock announcement at the top of the broadcom forum!
  2. Device had the original Linksys firmware on it.
  3. Connected power and Ethernet cable to the router.
  4. Reset the router to defaults using the reset button.
  5. Waited until lights returned to normal (longer is better).
      • There is A LOT of WAITING. Cannot emphasize that enough. Waiting is the key. **
  6. Connected to http://192.168.1.1 using Internet Explorer.
  7. Download this file: ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin
  8. Go to the firmware upgrade page and upgrade the router to the file you downloaded in the previous setp
  9. Wait at least five full earth minutes AND until you get until Upgrade Successful message and lights returned to normal.


Now you can can begin configuring your router.
Start by going to 192.168.1.1. with your web browser and TYPING in a user name and passphrase. Do NOT ever save these with the web browser.