Linksys WRT54GS v1.0

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:58, 29 September 2009 (edit)
DHC DarkShadow (Talk | contribs)

← Previous diff
Revision as of 00:01, 30 September 2009 (edit) (undo)
DHC DarkShadow (Talk | contribs)

Next diff →
Line 1: Line 1:
== How To Flash == == How To Flash ==
- 
- 
- 
-== JTAG Recovery == 
-JTAG: 
- 
-#Erase Wholeflash x2 
-#Flash CFE 
-#Unplug Power 
-#Unplug JTAG Cable 
- 
-TFTP 
- 
-#Set Rig ip static 192.168.1.10 
-#Plug network cable from rig to port 1 
-#Plug in power 
-#Wait for DMZ light to do a steady pulse, When it is lit on the 3rd time click upgrade. The DMZ light must be lit when you click upgrade. 
-#Hard Reset 30\30\30  

Revision as of 00:01, 30 September 2009

How To Flash

Other Notes

[comment added 17/05/08 by 7E0D1450] I installed dd-wrt.v24-9433_VINT_mega.bin directly from Linksys Web Interface (Firmware version 2.07.1) without problems or issues. The procedure is:

   1. Hard Reset (press for 30 secs the reset button - IMPORTANT).
   2. Upload the firmware from Linksys Web Interface.
   3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT).

Reference in dd-wrt forum: [1]

____________________________________________ [comment added 18/03/09 by fattrain] I installed dd-wrt.v24-9517_VINT_std.bin directly from Linksys Web Interface (Firmware version Ver.4.71.4) without problems or issues. The procedure is:

   1. Hard Reset (press for 30 secs the reset button - IMPORTANT).
   2. Upload the firmware from Linksys Web Interface.
   3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT).

Enjoy! :-)