Linksys WRT310N v2.0

From DD-WRT Wiki

Revision as of 02:43, 15 October 2010 by Rootxploit (Talk | contribs)
Jump to: navigation, search

This page reserved for Linksys WRT310N v2.0 only

1) Do a 30-30-30*. Router goes into management mode.

2) Select the option to reset the NVRAM.

3) Select the option to reboot the router.

4) Log into default Linksys router web control panel.

5) Use normal Linksys firmware upgrade process to load an image with broadcom_K26 and small builds:

dd-wrt.v24-13832_NEWD-2_K2.6_mini_wrt310nv2.bin or dd-wrt.v24-13594_NEWD-2_K2.6_mini_wrt310nv2.bin or dd-wrt.v24-13594_NEWD-2_K2.6_mini.bin

Other versions may brick your router

6) Do another hard reset (30-30-30*) after the upgrade. Router goes into management mode.

7) Select the option to reboot the router.

8) Start using DD-WRT

  • may need do telnet in and do:

"erase nvram" "nvram set clkfreq=400,200,100 " "nvram commit" "reboot"


Note: This is just compiled from the forums.