Linksys WRT310N v2.0

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 03:20, 15 October 2010 (edit)
Rootxploit (Talk | contribs)

← Previous diff
Revision as of 07:00, 1 December 2010 (edit) (undo)
NiteSnow (Talk | contribs)

Next diff →
Line 1: Line 1:
This page reserved for Linksys WRT310N v2.0 only This page reserved for Linksys WRT310N v2.0 only
-1. While on, push and hold down the reset button continously for 30 seconds, unplug the power while continuing to hold for another 30 seconds, then plug back in while continuing to hold reset button for a final 30 seconds. (90 second button hold-down time)+1. Method A) While on, push and hold down the reset button continously for 30 seconds, unplug the power while continuing to hold for another 30 seconds, then plug back in while continuing to hold reset button for a final 30 seconds. (90 second button hold-down time)
-2. Go to http://192.168.1.1 from a computer, and instead of the normal linksys control panel you'll see a "management" window with 2 options, to upload a new firmware and reset the NVRAM. Click on 'Reset NVRAM' to reset NVRAM. Wait a few seconds, then unplug the router for several seconds, then plug back in.+Method B) plug the router in and hold down the reset button imediatly for 5 seconds.
-3. Go to http://192.168.1.1 again, and this time use login 'admin' and password 'admin' to login.+2. Go to [http://192.168.1.1/ http://192.168.1.1/] and you'll see a "management" page with two options, to upload a new firmware and Reset NVRAM, Click 'Reset NVRAM' Wait a few seconds and then proceed to update the firmware by going back to [http://192.168.1.1/ http://192.168.1.1/] and clicking 'Upload a new firmware' selecting and selecting the file mentioned below
 + 
 +Only use Broadcom K26 firmware images this one works and it's stable [ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/11-21-10-r15778/broadcom_K26/dd-wrt.v24-15778_NEWD-2_K2.6_mini_wrt310nv2.bin dd-wrt.v24-15778_NEWD-2_K2.6_mini_wrt310nv2.bin]
-5) Use normal Linksys firmware upgrade process(firmware updated tab) to load an image with broadcom_K26 and small builds:  
- [ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/02-03-10-r13832/broadcom_K26/ dd-wrt.v24-13832_NEWD-2_K2.6_mini_wrt310nv2.bin] or [http://www.dd-wrt.com/phpBB2/download.php?id=12815 dd-wrt.v24-13594_NEWD-2_K2.6_mini_wrt310nv2.bin] or [http://www.dd-wrt.com/phpBB2/download.php?id=12816 dd-wrt.v24-13594_NEWD-2_K2.6_mini.bin]  
-'''Other versions may brick your router'''  
After the upload completes, wait 3 minutes to let the router 'settle down' after the 'upgrade successful' message. After the upload completes, wait 3 minutes to let the router 'settle down' after the 'upgrade successful' message.
-5. Now unplug your router for a minute, then plug back in. Go to http://192.168.1.1 and you should see DDWRT's control panel, don't touch anything yet. Wait about 2 mins before heading to step 6.+3. Now unplug your router for a minute, then plug back in. Go to [http://192.168.1.1 http://192.168.1.1/] and you should see DD-WRT's control panel your router is now flashed to DD-WRT have fun and configure your router to your liking
- +
-6. Repeat Step #1 (30-30-30 Hard Reset).+
- +
-7. Go to http://192.168.1.1 and you'll once again see the Linksys management screen. This time hit 'Erase NVRAM', unplug and plug back in your router. (Don't skip this step!) +
- +
- +
-Optional:+
-A)+
-"nvram set clkfreq=400,200,100 "+
-"nvram commit" +
-"reboot" +
- +
-B)telnet into the router and run:+
-date -s "2 OCT 2006 18:00:00" +
 +Do not try to over clock this router or change the clock as stated previously keep it at 300Mhz or else it can and or will over heat
[[Category:Linksys]] [[Category:Linksys]]

Revision as of 07:00, 1 December 2010

This page reserved for Linksys WRT310N v2.0 only

1. Method A) While on, push and hold down the reset button continously for 30 seconds, unplug the power while continuing to hold for another 30 seconds, then plug back in while continuing to hold reset button for a final 30 seconds. (90 second button hold-down time)

Method B) plug the router in and hold down the reset button imediatly for 5 seconds.

2. Go to http://192.168.1.1/ and you'll see a "management" page with two options, to upload a new firmware and Reset NVRAM, Click 'Reset NVRAM' Wait a few seconds and then proceed to update the firmware by going back to http://192.168.1.1/ and clicking 'Upload a new firmware' selecting and selecting the file mentioned below

Only use Broadcom K26 firmware images this one works and it's stable dd-wrt.v24-15778_NEWD-2_K2.6_mini_wrt310nv2.bin

After the upload completes, wait 3 minutes to let the router 'settle down' after the 'upgrade successful' message.

3. Now unplug your router for a minute, then plug back in. Go to http://192.168.1.1/ and you should see DD-WRT's control panel your router is now flashed to DD-WRT have fun and configure your router to your liking

Do not try to over clock this router or change the clock as stated previously keep it at 300Mhz or else it can and or will over heat