Linksys WRT160NL
From DD-WRT Wiki
Revision as of 08:47, 30 April 2010 (edit) Glenn (Talk | contribs) (+cat) ← Previous diff |
Revision as of 22:59, 12 May 2010 (edit) (undo) Dark Shadow (Talk | contribs) Next diff → |
||
Line 1: | Line 1: | ||
+ | [[Category:WRT160NL]] | ||
+ | |||
+ | Front: | ||
+ | [[Image:WRT160NL-front.jpg]] | ||
+ | |||
+ | Back: | ||
+ | [[Image:WRT160NL-back.jpg]] | ||
+ | |||
+ | == Complete installation and modding guide for WRT160NL == | ||
+ | for DD-WRT is available at http://wrt160nl.org <br> | ||
+ | '''please help us with translation or other contributions, the site is being developed''' | ||
+ | <br> | ||
+ | (transmission torrent client, samba, FTP, printer sharing, 3G support) | ||
+ | |||
+ | |||
+ | |||
+ | ==Specifications== | ||
+ | |||
+ | '''Model WRT160NL''' | ||
+ | |||
+ | '''Chipset:''' Atheros AP81 | ||
+ | |||
+ | '''ROM:''' 8MB | ||
+ | |||
+ | '''RAM:''' 32MB | ||
+ | |||
+ | |||
+ | Standards: 802.3, 802.3u, 802.11b, 802.11g, Draft 802.11n | ||
+ | Ports: Ports Internet, Ethernet [1-4], USB, Power | ||
+ | Buttons: Wi-Fi Protected Setup, Reset | ||
+ | LEDs: LAN [1-4], W-Fi Protected Setup™, Wireless, Internet, Power | ||
+ | |||
+ | Cabling Type CAT 5e | ||
+ | # of Antennas 2 | ||
+ | Connector Type R-SMA | ||
+ | Detachable (y/n) Yes | ||
+ | |||
+ | RF Pwr (EIRP) in dBm Draft 11n: HT20: Typ. 17 +/-1.5dBm @Normal Temp Range (2 Chains) | ||
+ | HT40: Typ. 15 +/-1.5dBm @Normal Temp Range (2 Chains) | ||
+ | 802.11g: Typ: 15 +/- 1.5 dBm @ Normal Temp Range | ||
+ | 802.11b: Typ: 19 +/- 1.5 dBm @ Normal Temp Range | ||
+ | |||
+ | Receive Sensitivity 802.11n HT40/MCS15 270 Mbps: -67 dBm 10% PER | ||
+ | 802.11n HT40/MCS0 13.5 Mbps: -75 dBm 10% PER | ||
+ | 802.11n HT20/MCS15 130 Mbps: -69 dBm 10% PER | ||
+ | 802.11n HT20/MCS0 6.5 Mbps: -79 dBm 10% PER | ||
+ | 802.11g 54 Mbps: -74 dBm 10% PER | ||
+ | 802.11g 6 Mbps: -84 dBm 10% PER | ||
+ | 802.11b 11 Mbps: -86 dBm 10% PER | ||
+ | 802.11b 1 Mbps: -92 dBm 10% PER | ||
+ | |||
+ | Antenna Gain in dBi 802.11g: 2.4 GHz <= 1.8dBi | ||
+ | Draft 11n: 2.4 GHz <= 1.8 dBi | ||
+ | |||
+ | |||
The WRT160NL is supported via DD-WRT firmware and is downloadable from the router database.<p> | The WRT160NL is supported via DD-WRT firmware and is downloadable from the router database.<p> | ||
The router will support a load of 3G modems with this firmware! (yes it is a free DD-WRT version for WRT160NL) | The router will support a load of 3G modems with this firmware! (yes it is a free DD-WRT version for WRT160NL) |
Revision as of 22:59, 12 May 2010
Complete installation and modding guide for WRT160NL
for DD-WRT is available at http://wrt160nl.org
please help us with translation or other contributions, the site is being developed
(transmission torrent client, samba, FTP, printer sharing, 3G support)
Specifications
Model WRT160NL
Chipset: Atheros AP81
ROM: 8MB
RAM: 32MB
Standards: 802.3, 802.3u, 802.11b, 802.11g, Draft 802.11n
Ports: Ports Internet, Ethernet [1-4], USB, Power
Buttons: Wi-Fi Protected Setup, Reset
LEDs: LAN [1-4], W-Fi Protected Setup™, Wireless, Internet, Power
Cabling Type CAT 5e
- of Antennas 2
Connector Type R-SMA Detachable (y/n) Yes
RF Pwr (EIRP) in dBm Draft 11n: HT20: Typ. 17 +/-1.5dBm @Normal Temp Range (2 Chains) HT40: Typ. 15 +/-1.5dBm @Normal Temp Range (2 Chains) 802.11g: Typ: 15 +/- 1.5 dBm @ Normal Temp Range 802.11b: Typ: 19 +/- 1.5 dBm @ Normal Temp Range
Receive Sensitivity 802.11n HT40/MCS15 270 Mbps: -67 dBm 10% PER 802.11n HT40/MCS0 13.5 Mbps: -75 dBm 10% PER 802.11n HT20/MCS15 130 Mbps: -69 dBm 10% PER 802.11n HT20/MCS0 6.5 Mbps: -79 dBm 10% PER 802.11g 54 Mbps: -74 dBm 10% PER 802.11g 6 Mbps: -84 dBm 10% PER 802.11b 11 Mbps: -86 dBm 10% PER 802.11b 1 Mbps: -92 dBm 10% PER
Antenna Gain in dBi 802.11g: 2.4 GHz <= 1.8dBi Draft 11n: 2.4 GHz <= 1.8 dBi
The router will support a load of 3G modems with this firmware! (yes it is a free DD-WRT version for WRT160NL)
There is a complete guide for the installation of DD-WRT at http://www.wrt160nl.org
Also there is a script mentioned which can be get via wget
wget http://wrt160nl.org/files/wrt160nlmod.sh <p>
This script is
mounting the ext3 drive connected to the router (also if via an USB HUB)
Install FTP
Install Samba
Install transmission torrent client (with WebUI)
Install printer
Install boot-scripts so every service starts automatically with every reboot
The script has been developed by tema.