Linksys WRT160NL
From DD-WRT Wiki
Revision as of 06:48, 25 April 2010 (edit) Tsoky (Talk | contribs) (DD-WRT installation for WRT160NL) ← Previous diff |
Current revision (15:44, 19 December 2017) (edit) (undo) Ian5142 (Talk | contribs) (Updated to add Where do I download link.) |
||
(12 intermediate revisions not shown.) | |||
Line 1: | Line 1: | ||
- | + | =Specifications= | |
- | + | ||
- | ''' | + | '''Model WRT160NL''' |
- | + | ||
- | + | ||
- | ''' | + | '''Chipset:''' [[Atheros AP81]] |
- | + | ||
- | + | '''ROM:''' 8MB | |
- | + | ||
- | + | '''RAM:''' 32MB | |
- | + | ||
- | '' | + | |
+ | Standards: 802.3, 802.3u, 802.11b, 802.11g, Draft 802.11n | ||
+ | Ports: Ports Internet, Ethernet [1-4], USB, Power | ||
+ | Buttons: Wi-Fi Protected Setup, Reset | ||
+ | LEDs: LAN [1-4], W-Fi Protected Setup™, Wireless, Internet, Power | ||
+ | |||
+ | Cabling Type CAT 5e | ||
+ | number of Antennas 2 | ||
+ | Connector Type R-SMA | ||
+ | Detachable (y/n) Yes | ||
+ | |||
+ | RF Pwr (EIRP) in dBm Draft 11n: HT20: Typ. 17 +/-1.5dBm @Normal Temp Range (2 Chains) | ||
+ | HT40: Typ. 15 +/-1.5dBm @Normal Temp Range (2 Chains) | ||
+ | 802.11g: Typ: 15 +/- 1.5 dBm @ Normal Temp Range | ||
+ | 802.11b: Typ: 19 +/- 1.5 dBm @ Normal Temp Range | ||
+ | |||
+ | Receive Sensitivity 802.11n HT40/MCS15 270 Mbps: -67 dBm 10% PER | ||
+ | 802.11n HT40/MCS0 13.5 Mbps: -75 dBm 10% PER | ||
+ | 802.11n HT20/MCS15 130 Mbps: -69 dBm 10% PER | ||
+ | 802.11n HT20/MCS0 6.5 Mbps: -79 dBm 10% PER | ||
+ | 802.11g 54 Mbps: -74 dBm 10% PER | ||
+ | 802.11g 6 Mbps: -84 dBm 10% PER | ||
+ | 802.11b 11 Mbps: -86 dBm 10% PER | ||
+ | 802.11b 1 Mbps: -92 dBm 10% PER | ||
+ | |||
+ | Antenna Gain in dBi 802.11g: 2.4 GHz <= 1.8dBi | ||
+ | Draft 11n: 2.4 GHz <= 1.8 dBi | ||
+ | |||
+ | '''Ethernet:''' Realtek RTL8306S | ||
+ | |||
+ | '''Wi-Fi:''' AG7100 | ||
+ | |||
+ | '''TX / RX Antenna Chains''': 1+3 for both (WRT160NL has no antenna #2 - see [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=138728 this Forum thread]) | ||
+ | |||
+ | =Support= | ||
+ | |||
+ | The WRT160NL is supported via DD-WRT firmware and is downloadable from [https://www.dd-wrt.com/wiki/index.php/Index:FAQ#Where_do_I_download_firmware.3F Where do I download firmware].<p> | ||
+ | The router will support a load of 3G modems with this firmware! | ||
+ | |||
+ | = Pictures = | ||
+ | |||
+ | |||
+ | |||
+ | Front: | ||
+ | [[Image:WRT160NL-front.jpg]] | ||
+ | |||
+ | Back: | ||
+ | [[Image:WRT160NL-back.jpg]] | ||
+ | |||
+ | |||
+ | [[Category:WRT160NL]] | ||
+ | [[Category:Linksys guides]] |
Current revision
[edit] Specifications
Model WRT160NL
Chipset: Atheros AP81
ROM: 8MB
RAM: 32MB
Standards: 802.3, 802.3u, 802.11b, 802.11g, Draft 802.11n
Ports: Ports Internet, Ethernet [1-4], USB, Power
Buttons: Wi-Fi Protected Setup, Reset
LEDs: LAN [1-4], W-Fi Protected Setup™, Wireless, Internet, Power
Cabling Type CAT 5e number of Antennas 2 Connector Type R-SMA Detachable (y/n) Yes
RF Pwr (EIRP) in dBm Draft 11n: HT20: Typ. 17 +/-1.5dBm @Normal Temp Range (2 Chains) HT40: Typ. 15 +/-1.5dBm @Normal Temp Range (2 Chains) 802.11g: Typ: 15 +/- 1.5 dBm @ Normal Temp Range 802.11b: Typ: 19 +/- 1.5 dBm @ Normal Temp Range
Receive Sensitivity 802.11n HT40/MCS15 270 Mbps: -67 dBm 10% PER 802.11n HT40/MCS0 13.5 Mbps: -75 dBm 10% PER 802.11n HT20/MCS15 130 Mbps: -69 dBm 10% PER 802.11n HT20/MCS0 6.5 Mbps: -79 dBm 10% PER 802.11g 54 Mbps: -74 dBm 10% PER 802.11g 6 Mbps: -84 dBm 10% PER 802.11b 11 Mbps: -86 dBm 10% PER 802.11b 1 Mbps: -92 dBm 10% PER
Antenna Gain in dBi 802.11g: 2.4 GHz <= 1.8dBi Draft 11n: 2.4 GHz <= 1.8 dBi
Ethernet: Realtek RTL8306S
Wi-Fi: AG7100
TX / RX Antenna Chains: 1+3 for both (WRT160NL has no antenna #2 - see this Forum thread)
[edit] Support
The WRT160NL is supported via DD-WRT firmware and is downloadable from Where do I download firmware.The router will support a load of 3G modems with this firmware!
[edit] Pictures
Back: