Linksys RV042

From DD-WRT Wiki

Revision as of 01:40, 8 March 2009 by Sash (Talk | contribs)
Jump to: navigation, search


Contents


Linksys RV042

THX to voidit

Hardware

CPU: Intel IXP425 @ 266MHz
Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H)
Flash: 8MB (Numonyx JS28F640J3D75)
Switch: Infineon ADM6999 (8 port)
1 serial port (unsolderd)
1 jtag port (unsolderd)
1 mPCI port (unsoldert)

CPU info

cat /proc/cpuinfo
Processor  : Intel XScale-IXP425 rev 1 (v5b)
BogoMIPS  : 266.24
Features  : swp half thumb fastmult edsp
Hardware  : Intel IXP425 IXDP425
Revision  : 0000
Serial  : 0000000000000000

Orig firmware

1.3.13tm
user: admin
pw: admin

Telnet access

Login to the device.
Access the following site on the webif:

http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1 

Change the ip if needed.
The device will answer a status page and if u see:

...
Mfg_Status=Support Console Simulation !

Telnet will be reachable on port 23

Backup

After enabling telnet access u are able to do a full flash backup. You will need a lil .py script that will do the backup of the orig flash content and flash the new redboot. A backup of this script can be found here: Jungo-image.jpg. But u will have to rename it to Jungo-image.py!

Busybox shell

To enable the busybox shell do

exec /bin/sh

Linux version

cat /proc/version Linux version 2.4.19openrg-rmk6-ds1

External links

http://voidit.blog.com/1974773/
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1169671246380&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=4638084445B01#RV042
http://wiki.openwrt.org/OpenWrtDocs/Hardware/Actiontec/MI424-WR