Linksys RV042
From DD-WRT Wiki
Contents |
Linksys RV042
Hardware
CPU: Intel IXP425 @ 266MHz
Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H)
Flash: 8MB (Numonyx JS28F640J3D75)
Switch: Infineon ADM6999 (8 port)
1 serial port (unsolderd)
1 jtag port (unsolderd)
1 mPCI port (unsoldert)
CPU info
cat /proc/cpuinfo
Processor : Intel XScale-IXP425 rev 1 (v5b)
BogoMIPS : 266.24
Features : swp half thumb fastmult edsp
Hardware : Intel IXP425 IXDP425
Revision : 0000
Serial : 0000000000000000
Orig firmware
1.3.13tm
Telnet access
- Login to the device
- Access the following site on the webif http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1 . Change the ip if needed.
The device will answer a status page and if u see ... Mfg_Status=Support Console Simulation !
Telnet will be reachable on port 23
Backup
After enabling telnet access u are able to do a full flash backup. You will need a lil .py script that will do the backup of the orig flash content and flash the new redboot. A backup of this script can be found here: Jungo-image.jpg. But u will have to rename it to Jungo-image.py!
External links
http://voidit.blog.com/1974773/
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1169671246380&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=4638084445B01#RV042
http://wiki.openwrt.org/OpenWrtDocs/Hardware/Actiontec/MI424-WR