Linksys RV042
From DD-WRT Wiki
Revision as of 21:54, 12 May 2010 (edit) Dark Shadow (Talk | contribs) (→External links) ← Previous diff |
Revision as of 23:50, 2 October 2011 (edit) (undo) Unforgiven512 (Talk | contribs) m (Corrected grammatical errors) Next diff → |
||
Line 47: | Line 47: | ||
==Backup== | ==Backup== | ||
- | After enabling telnet access | + | After enabling telnet access, you are able to do a full flash backup. You will need a little [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo-image.py?format=txt python script] that will do the backup of the original flash content, as well as flash the new reboot. A backup of this script can be found here: [[Media:Jungo-image.jpg|Jungo-image.jpg]] If you use this image, you will have to rename it to ''jungo-image.py'' |
==Busybox shell== | ==Busybox shell== |
Revision as of 23:50, 2 October 2011
Contents |
Linksys RV042
THX to voidit
Hardware
CPU: Intel IXP425 @ 266MHz
Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H)
Flash: 8MB (Numonyx JS28F640J3D75)
Switch: Infineon ADM6999 (8 port)
1 serial port (unsoldered)
1 jtag port (unsoldered)
1 mPCI port (unsoldered)
CPU info
cat /proc/cpuinfo
Processor : Intel XScale-IXP425 rev 1 (v5b)
BogoMIPS : 266.24
Features : swp half thumb fastmult edsp
Hardware : Intel IXP425 IXDP425
Revision : 0000
Serial : 0000000000000000
Orig firmware
1.3.13tm
user: admin
pw: admin
The latest original firmware would be "1.3.12.19-tm (Feb 13 2009 13:03:21)"
http://www.cisco.com/en/US/prod/routers/ps9923/ps9925/RV042_Firmware.zip
Telnet access
Login to the device.
Access the following site on the webif:
http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1
Change the ip if needed.
The device will answer a status page and if u see:
... Mfg_Status=Support Console Simulation !
Telnet will be reachable on port 23
Backup
After enabling telnet access, you are able to do a full flash backup. You will need a little python script that will do the backup of the original flash content, as well as flash the new reboot. A backup of this script can be found here: Jungo-image.jpg If you use this image, you will have to rename it to jungo-image.py
Busybox shell
To enable the busybox shell do
exec /bin/sh
Linux version
cat /proc/version
Linux version 2.4.19openrg-rmk6-ds1
External links
rv042
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1169671246380&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=4638084445B01#RV042
http://nuwiki.openwrt.org/toh/actiontec/mi424wr
http://nuwiki.openwrt.org/oldwiki/openwrtdocs/hardware/actiontec/mi424_wr