Linksys RV042
From DD-WRT Wiki
(Difference between revisions)
Revision as of 21:23, 7 March 2009 (edit) Sash (Talk | contribs) ← Previous diff |
Revision as of 21:29, 7 March 2009 (edit) (undo) Sash (Talk | contribs) (→Hardware) Next diff → |
||
Line 6: | Line 6: | ||
=Hardware= | =Hardware= | ||
+ | |||
+ | CPU: Intel IXP425 @ 266MHz | ||
+ | Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H) | ||
+ | Flash: 8MB (Numonyx JS28F640J3D75) | ||
==CPU info== | ==CPU info== | ||
Revision as of 21:29, 7 March 2009
Contents |
Linksys RV042
Hardware
CPU: Intel IXP425 @ 266MHz Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H) Flash: 8MB (Numonyx JS28F640J3D75)
CPU info
cat /proc/cpuinfo
Processor : Intel XScale-IXP425 rev 1 (v5b)
BogoMIPS : 266.24
Features : swp half thumb fastmult edsp
Hardware : Intel IXP425 IXDP425
Revision : 0000
Serial : 0000000000000000
Orig firmware
1.3.13tm
Telnet access
- Login to the device
- Access the following site on the webif http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1 . Change the ip if needed.
The device will answer a status page and if u see ... Mfg_Status=Support Console Simulation !
Telnet will be reachable on port 23