Linksys RV042

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 05:50, 26 October 2009 (edit)
Jghake (Talk | contribs)
(Hardware)
← Previous diff
Current revision (19:50, 4 November 2021) (edit) (undo)
Kernel-panic69 (Talk | contribs)
(External links)
 
(6 intermediate revisions not shown.)
Line 1: Line 1:
-[[Category:English documentation]] 
-[[Category: Linksys]] 
- 
__TOC__ __TOC__
Line 34: Line 31:
pw: admin <br> pw: admin <br>
<br> <br>
-The latest original firmware would be "1.3.12.19-tm (Feb 13 2009 13:03:21)" <br>+The oldest known original firmware would be "1.3.12.19-tm (Feb 13 2009 13:03:21)"<br>
http://www.cisco.com/en/US/prod/routers/ps9923/ps9925/RV042_Firmware.zip<br> http://www.cisco.com/en/US/prod/routers/ps9923/ps9925/RV042_Firmware.zip<br>
 +'''NOTE:''' See external links below for further information on current stock firmware releases.<br>
 +
==Telnet access== ==Telnet access==
Line 50: Line 49:
==Backup== ==Backup==
-After enabling telnet access u are able to do a full flash backup. You will need a lil [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo-image.py?format=txt .py script] that will do the backup of the orig flash content and flash the new redboot. A backup of this script can be found here: [[Media:Jungo-image.jpg|Jungo-image.jpg]]. But u will have to rename it to Jungo-image.py!+After enabling telnet access, you are able to do a full flash backup. You will need a little [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo-image.py?format=txt python script] that will do the backup of the original flash content, as well as flash the new reboot. A backup of this script can be found here: [[Media:Jungo-image.jpg|Jungo-image.jpg]] If you use this image, you will have to rename it to ''jungo-image.py''
==Busybox shell== ==Busybox shell==
Line 63: Line 62:
=External links= =External links=
-http://voidit.blog.com/1974773/ <br>+[https://web.archive.org/web/20151106134902/http://www.dd-wrt.com/phpBB2/viewtopic.php?t=46764 rv042 forum thread (archive)]<br>
-http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1169671246380&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=4638084445B01#RV042 <br>+https://www.cisco.com/c/en/us/products/routers/rv042-dual-wan-vpn-router/index.html<br>
-http://wiki.openwrt.org/OpenWrtDocs/Hardware/Actiontec/MI424-WR+https://www.cisco.com/c/en/us/support/routers/rv042-dual-wan-vpn-router/model.html#~tab-downloads<br>
 +https://www.linksys.com/us/support-article?articleNum=132712<br>
 +https://openwrt.org/toh/actiontec/mi424wr<br>
 +https://oldwiki.archive.openwrt.org/toh/actiontec/mi424wr
 + 
 +[[Category: Linksys]]

Current revision

Contents


Linksys RV042

THX to voidit

[edit] Hardware

CPU: Intel IXP425 @ 266MHz
Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H)
Flash: 8MB (Numonyx JS28F640J3D75)
Switch: Infineon ADM6999 (8 port)
1 serial port (unsoldered)
1 jtag port (unsoldered)
1 mPCI port (unsoldered)

[edit] CPU info

cat /proc/cpuinfo
Processor  : Intel XScale-IXP425 rev 1 (v5b)
BogoMIPS  : 266.24
Features  : swp half thumb fastmult edsp
Hardware  : Intel IXP425 IXDP425
Revision  : 0000
Serial  : 0000000000000000

[edit] Orig firmware

1.3.13tm
user: admin
pw: admin

The oldest known original firmware would be "1.3.12.19-tm (Feb 13 2009 13:03:21)"
http://www.cisco.com/en/US/prod/routers/ps9923/ps9925/RV042_Firmware.zip
NOTE: See external links below for further information on current stock firmware releases.

[edit] Telnet access

Login to the device.
Access the following site on the webif:

http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1 

Change the ip if needed.
The device will answer a status page and if u see:

...
Mfg_Status=Support Console Simulation !

Telnet will be reachable on port 23

[edit] Backup

After enabling telnet access, you are able to do a full flash backup. You will need a little python script that will do the backup of the original flash content, as well as flash the new reboot. A backup of this script can be found here: Jungo-image.jpg If you use this image, you will have to rename it to jungo-image.py

[edit] Busybox shell

To enable the busybox shell do

exec /bin/sh

[edit] Linux version

cat /proc/version
Linux version 2.4.19openrg-rmk6-ds1

[edit] External links

rv042 forum thread (archive)
https://www.cisco.com/c/en/us/products/routers/rv042-dual-wan-vpn-router/index.html
https://www.cisco.com/c/en/us/support/routers/rv042-dual-wan-vpn-router/model.html#~tab-downloads
https://www.linksys.com/us/support-article?articleNum=132712
https://openwrt.org/toh/actiontec/mi424wr
https://oldwiki.archive.openwrt.org/toh/actiontec/mi424wr