Linksys RV042

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 21:33, 7 March 2009 (edit)
Sash (Talk | contribs)
(External links)
← Previous diff
Revision as of 23:50, 2 October 2011 (edit) (undo)
Unforgiven512 (Talk | contribs)
m (Corrected grammatical errors)
Next diff →
(21 intermediate revisions not shown.)
Line 1: Line 1:
-[[Category:English documentation]] 
- 
__TOC__ __TOC__
-Linksys RV042+'''Linksys RV042'''<br><br>
 + 
 +THX to voidit
=Hardware= =Hardware=
Line 10: Line 10:
Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H)<br> Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H)<br>
Flash: 8MB (Numonyx JS28F640J3D75)<br> Flash: 8MB (Numonyx JS28F640J3D75)<br>
-Switch: Infineon ADM6999 (8 port)+Switch: Infineon ADM6999 (8 port) <br>
-1 serial port (unsolderd)<br>+1 serial port (unsoldered)<br>
-1 jtag port (unsolderd)<br>+1 jtag port (unsoldered)<br>
-1 mPCI port (unsoldert)<br>+1 mPCI port (unsoldered)<br>
==CPU info== ==CPU info==
Line 26: Line 26:
=Orig firmware= =Orig firmware=
-1.3.13tm 
-==Telnet access== 
-*Login to the device+1.3.13tm <br>
-*Access the following site on the webif http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1 . Change the ip if needed.+user: admin <br>
 +pw: admin <br>
 +<br>
 +The latest original firmware would be "1.3.12.19-tm (Feb 13 2009 13:03:21)" <br>
 +http://www.cisco.com/en/US/prod/routers/ps9923/ps9925/RV042_Firmware.zip<br>
 +==Telnet access==
-The device will answer a status page and if u see+Login to the device.<br>
-...+Access the following site on the webif:<br>
-Mfg_Status=Support Console Simulation !+ http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1 <br>
 +Change the ip if needed.<br>
 +The device will answer a status page and if u see:<br>
 + ...
 + Mfg_Status=Support Console Simulation !<br>
Telnet will be reachable on port 23 Telnet will be reachable on port 23
 +
 +==Backup==
 +
 +After enabling telnet access, you are able to do a full flash backup. You will need a little [https://dev.openwrt.org/browser/trunk/scripts/flashing/jungo-image.py?format=txt python script] that will do the backup of the original flash content, as well as flash the new reboot. A backup of this script can be found here: [[Media:Jungo-image.jpg|Jungo-image.jpg]] If you use this image, you will have to rename it to ''jungo-image.py''
 +
 +==Busybox shell==
 +
 +To enable the busybox shell do
 + exec /bin/sh
 +
 +==Linux version==
 +
 +cat /proc/version <br>
 +Linux version 2.4.19openrg-rmk6-ds1
=External links= =External links=
-http://voidit.blog.com/1974773/ <br>+[http://www.dd-wrt.com/phpBB2/viewtopic.php?t=46764 rv042]<br>
-http://wiki.openwrt.org/OpenWrtDocs/Hardware/Actiontec/MI424-WR+http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1169671246380&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=4638084445B01#RV042 <br>
 +http://nuwiki.openwrt.org/toh/actiontec/mi424wr<br>
 +http://nuwiki.openwrt.org/oldwiki/openwrtdocs/hardware/actiontec/mi424_wr
 + 
 +[[Category: Linksys]]

Revision as of 23:50, 2 October 2011

Contents


Linksys RV042

THX to voidit

Hardware

CPU: Intel IXP425 @ 266MHz
Ram: 32 MB (2x16MB Hynx HY57V281620ETP-H)
Flash: 8MB (Numonyx JS28F640J3D75)
Switch: Infineon ADM6999 (8 port)
1 serial port (unsoldered)
1 jtag port (unsoldered)
1 mPCI port (unsoldered)

CPU info

cat /proc/cpuinfo
Processor  : Intel XScale-IXP425 rev 1 (v5b)
BogoMIPS  : 266.24
Features  : swp half thumb fastmult edsp
Hardware  : Intel IXP425 IXDP425
Revision  : 0000
Serial  : 0000000000000000

Orig firmware

1.3.13tm
user: admin
pw: admin

The latest original firmware would be "1.3.12.19-tm (Feb 13 2009 13:03:21)"
http://www.cisco.com/en/US/prod/routers/ps9923/ps9925/RV042_Firmware.zip

Telnet access

Login to the device.
Access the following site on the webif:

http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1 

Change the ip if needed.
The device will answer a status page and if u see:

...
Mfg_Status=Support Console Simulation !

Telnet will be reachable on port 23

Backup

After enabling telnet access, you are able to do a full flash backup. You will need a little python script that will do the backup of the original flash content, as well as flash the new reboot. A backup of this script can be found here: Jungo-image.jpg If you use this image, you will have to rename it to jungo-image.py

Busybox shell

To enable the busybox shell do

exec /bin/sh

Linux version

cat /proc/version
Linux version 2.4.19openrg-rmk6-ds1

External links

rv042
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1169671246380&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=4638084445B01#RV042
http://nuwiki.openwrt.org/toh/actiontec/mi424wr
http://nuwiki.openwrt.org/oldwiki/openwrtdocs/hardware/actiontec/mi424_wr