Linksys EA8500

From DD-WRT Wiki

Revision as of 11:00, 9 September 2016 by Skygunner (Talk | contribs)
Jump to: navigation, search

[DD-WRT Forum discussing thread http://www.dd-wrt.com/phpBB2/viewtopic.php?p=1046299]

boot log r30082


[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.18.36 (root@seg-desktop) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r47665) ) #81 SMP PREEMPT Sun Jun 26 02:51:26 CEST 2016
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Linksys EA8500 WiFi Router
[    0.000000] Ignoring memory range 0x41500000 - 0x42000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000] free_area_init_node: node 0, pgdat c0716840, node_mem_map ddc39000
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 9 pages/cpu @ddc13000 s7552 r8192 d21120 u36864
[    0.000000] pcpu-alloc: s7552 r8192 d21120 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfstype=squashfs noinitrd console=ttyHSL1,115200n8 init=/sbin/init rootfstype=squashfs root=31:14
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 481272K/491520K available (3822K kernel code, 282K rwdata, 1104K rodata, 184K init, 404K bss, 10248K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff000000   ( 520 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc06d7e4c   (4928 kB)
[    0.000000]       .init : 0xc06d8000 - 0xc0706000   ( 184 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074ca44   ( 283 kB)
[    0.000000]        .bss : 0xc074ca44 - 0xc07b1bc4   ( 405 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000013] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 687194767200ns
[    0.000028] Switching to timer-based delay loop, resolution 160ns
[    0.000437] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000461] pid_max: default: 32768 minimum: 301
[    0.000707] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000724] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001372] CPU: Testing write buffer coherency: ok
[    0.001637] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002139] Setting up static identity map for 0x422131d8 - 0x42213230
[    0.063436] CPU1: Booted secondary processor
[    0.063570] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.063681] Brought up 2 CPUs
[    0.063704] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.063715] CPU: All CPU(s) started in SVC mode.
[    0.078756] VFP support v0.3: implementor 51 architecture 0 part 4d variant 2 rev 0
[    0.079304] pinctrl core: initialized pinctrl subsystem
[    0.079746] regulator-dummy: no parameters
[    0.089802] NET: Registered protocol family 16
[    0.090132] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.113850] cpuidle: using governor ladder
[    0.144867] cpuidle: using governor menu
[    0.164518] qcom_rpm 108000.rpm: RPM firmware 1.0.126
[    0.164580] qcom_rpm 108000.rpm: failed to mark ack irq as wakeup
[    0.164638] qcom_rpm 108000.rpm: failed to mark wakeup irq as wakeup
[    0.208938] smb208-s1a: 1050 <--> 1150 mV
[    0.209261] smb208-s1b: 1050 <--> 1150 mV
[    0.209568] smb208-s2a: 800 <--> 1250 mV
[    0.209895] smb208-s2b: 800 <--> 1250 mV
[    0.210386] pps_core: LinuxPPS API ver. 1 registered
[    0.210399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.210438] PTP clock support registered
[    0.211591] pcie_init: pcie_init: unable to create IPC log context for pcie0-short
[    0.211607] pcie_init: pcie_init: unable to create IPC log context for pcie0-long
[    0.211617] pcie_init: pcie_init: unable to create IPC log context for pcie1-short
[    0.211627] pcie_init: pcie_init: unable to create IPC log context for pcie1-long
[    0.212038] Switched to clocksource dg_timer
[    0.213480] NET: Registered protocol family 2
[    0.214159] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.214195] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.214248] TCP: Hash tables configured (established 4096 bind 4096)
[    0.214295] TCP: reno registered
[    0.214316] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.214337] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.214581] NET: Registered protocol family 1
[    0.214643] PCI: CLS 0 bytes, default 64
[    0.215771] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.216748] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[    0.216790] msgmni has been set to 939
[    0.219364] io scheduler noop registered
[    0.219387] io scheduler deadline registered (default)
[    0.220805] 1b500000.pci supply vdda not found, using dummy regulator
[    0.220885] 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.220955] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.250862] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.250886] pci_bus 0000:00: root bus resource [io  0xfe00000-0xfffff] (bus address [0x1fc00000-0xfefffff])
[    0.250904] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.250923] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.250972] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.251120] pci 0000:00:00.0: supports D1
[    0.251135] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.251465] PCI: bus0: Fast back to back transfers disabled
[    0.251816] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.252018] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.253055] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.253498] PCI: bus1: Fast back to back transfers disabled
[    0.253518] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.253671] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.253694] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.253805] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.253825] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.254262] aer 0000:00:00.0:pcie02: service driver aer loaded
[    0.254605] 1b700000.pci supply vdda not found, using dummy regulator
[    0.254690] 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.254768] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.284243] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.284262] pci_bus 0001:00: root bus resource [io  0x31e10000-0xfffff] (bus address [0x63c00000-0x31eeffff])
[    0.284277] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.284302] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.284345] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.284465] pci 0001:00:00.0: supports D1
[    0.284478] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.284788] PCI: bus0: Fast back to back transfers disabled
[    0.285130] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.285327] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.286266] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.286696] PCI: bus1: Fast back to back transfers disabled
[    0.286714] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.286931] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.286951] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.287057] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.287075] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.287468] aer 0001:00:00.0:pcie02: service driver aer loaded
[    0.287807] 1b900000.pci supply vdda not found, using dummy regulator
[    0.287885] 1b900000.pci supply vdda_phy not found, using dummy regulator
[    0.287956] 1b900000.pci supply vdda_refclk not found, using dummy regulator
[    0.418962] qcom-pcie 1b900000.pci: link initialization failed
[    0.421079] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00
[    0.421098] pci_bus 0002:00: root bus resource [io  0x35e20000-0xfffff] (bus address [0x6bc00000-0x35edffff])
[    0.421114] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff]
[    0.421131] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.421181] PCI: bus0: Fast back to back transfers enabled
[    0.423893] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.425237] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.426268] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.426365] msm_serial 16340000.serial: uartclk = 1843200
[    0.426421] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 184, base_baud = 115200) is a MSM
[    0.426478] msm_serial: console setup on port #0
[    1.153373] console [ttyMSM0] enabled
[    1.158150] msm_serial: driver initialized
[    1.164979] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[    1.165420] nand: AMD/Spansion S34MS01G2
[    1.171929] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[    1.175911] Scanning device for bad blocks
[    1.587202] random: nonblocking pool is initialized
[    1.890159] 19 ofpart partitions found on MTD device qcom-nandc
[    1.890188] Creating 19 MTD partitions on "qcom-nandc":
[    1.894970] 0x000000000000-0x000000040000 : "SBL1"
[    1.901018] 0x000000040000-0x000000180000 : "MIBIB"
[    1.905803] 0x000000180000-0x0000002c0000 : "SBL2"
[    1.910519] 0x0000002c0000-0x000000540000 : "SBL3"
[    1.915456] 0x000000540000-0x000000660000 : "DDRCONFIG"
[    1.920162] 0x000000660000-0x000000780000 : "SSD"
[    1.925327] 0x000000780000-0x000000a00000 : "TZ"
[    1.930144] 0x000000a00000-0x000000c80000 : "RPM"
[    1.934907] 0x000000c80000-0x000000dc0000 : "art"
[    1.939445] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[    1.944186] 0x000000ec0000-0x000000f00000 : "u_env"
[    1.949186] 0x000000f00000-0x000000f40000 : "s_env"
[    1.953858] 0x000000f40000-0x000000f80000 : "devinfo"
[    1.958596] 0x000000f80000-0x000003780000 : "linux"
[    1.963936] 0x000001280000-0x000003780000 : "rootfs"
[    1.968565] mtd: partition "rootfs" set to be root filesystem
[    1.973000] 0x000003780000-0x000005f40000 : "linux2"
[    1.979412] 0x000003a80000-0x000005f40000 : "rootfs2"
[    1.984535] 0x000005f40000-0x000005f80000 : "nvram"
[    1.989356] 0x000005f80000-0x000008000000 : "ddwrt"
[    1.995443] IMQ: autocreate imq0  NS c0746d00
[    1.998654] IMQ: autocreate imq1  NS c0746d00
[    2.002709] IMQ driver loaded successfully. (numdevs = 16, numqueues = 1)
[    2.006947]  Hooking IMQ after NAT on PREROUTING.
[    2.013788]  Hooking IMQ before NAT on POSTROUTING.
[    2.018720] libphy: Fixed MDIO Bus: probed
[    2.023595] libphy: GPIO Bitbanged MDIO: probed
[    2.048226] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[    2.262049] tun: Universal TUN/TAP device driver, 1.6
[    2.262074] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.267649] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.272151]  Ring mode enabled
[    2.277379]  DMA HW capability register supported
[    2.280224]  Enhanced/Alternate descriptors
[    2.284996]  Enabled extended descriptors
[    2.288989]  RX Checksum Offload Engine supported (type 2)
[    2.293232]  TX Checksum insertion supported
[    2.298537]  Wake-Up On Lan supported
[    2.303122]  Enable RX Mitigation via HW Watchdog Timer
[    2.307792] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.311558]  Ring mode enabled
[    2.316864]  DMA HW capability register supported
[    2.319718]  Enhanced/Alternate descriptors
[    2.324492]  Enabled extended descriptors
[    2.328484]  RX Checksum Offload Engine supported (type 2)
[    2.332718]  TX Checksum insertion supported
[    2.338032]  Wake-Up On Lan supported
[    2.342606]  Enable RX Mitigation via HW Watchdog Timer
[    2.346729] PPP generic driver version 2.4.2
[    2.351204] PPP BSD Compression module registered
[    2.355661] PPP Deflate Compression module registered
[    2.360192] PPP MPPE Compression module registered
[    2.365293] NET: Registered protocol family 24
[    2.369929] PPTP driver version 0.8.5
[    2.374533] i2c /dev entries driver
[    2.383827] Speed bin: 0
[    2.383851] PVS bin: 1
[    2.385839] platform cpufreq-krait.0: Driver cpufreq-krait requests probe deferral
[    2.389636] L2 @ QSB rate. Forcing new rate.
[    2.395475] L2 @ 387500 KHz
[    2.399694] CPU0 @ 800000 KHz
[    2.402089] CPU1 @ QSB rate. Forcing new rate.
[    2.405382] CPU1 @ 384000 KHz
[    2.409858] GACT probability NOT on
[    2.412683] Mirror/redirect action on
[    2.415922] Simple TC action Loaded
[    2.420513] netem: version 1.3
[    2.423160] u32 classifier
[    2.426130]     Performance counters on
[    2.428824]     input device check on
[    2.432630]     Actions configured
[    2.436420] Netfilter messages via NETLINK v0.30.
[    2.439737] nf_conntrack version 0.5.0 (7519 buckets, 30076 max)
[    2.444869] nf_conntrack_rtsp v0.7 loading
[    2.451058] xt_time: kernel timezone is -0000
[    2.454574] ip_set: protocol 6
[    2.459144] gre: GRE over IPv4 demultiplexor driver
[    2.462078] nf_nat_rtsp v0.7 loading
[    2.466722] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.470682] TCP: bic registered
[    2.475783] TCP: cubic registered
[    2.478575] TCP: westwood registered
[    2.482048] TCP: highspeed registered
[    2.485776] TCP: hybla registered
[    2.489254] TCP: htcp registered
[    2.492618] TCP: vegas registered
[    2.495849] TCP: veno registered
[    2.499064] TCP: scalable registered
[    2.502427] TCP: lp registered
[    2.505919] TCP: yeah registered
[    2.508784] TCP: illinois registered
[    2.512175] NET: Registered protocol family 17
[    2.515873] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.520031] Bridge firewalling registered
[    2.532826] 8021q: 802.1Q VLAN Support v1.8
[    2.536774] Registering SWP/SWPB emulation handler
[    2.544203] trying to register driver generic_krait
[    2.545512] Frequency table not initialized.
[    2.550388] Frequency table not initialized.
[    2.554908] Frequency table not initialized.
[    2.559034] Frequency table not initialized.
[    2.563369] Frequency table not initialized.
[    2.568707] Frequency table not initialized.
[    2.571863] Frequency table not initialized.
[    2.576126] Frequency table not initialized.
[    2.580299] Frequency table not initialized.
[    2.584607] Frequency table not initialized.
[    2.588822] driver generic_krait up and running
[    2.593177] searching for nvram
[    2.597336] nvram size = -1066981562
[    2.621444] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.629313] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
[    2.632043] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[    2.635997] Freeing unused kernel memory: 184K (c06d8000 - c0706000)
[    5.040792] UBIFS error (pid 737): ubifs_mount: cannot open "ubi0:rootfs_data", error -19
[    5.767687] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796
[    5.767716] Backport generated by backports.git backports-20160216-0-ge3c56e4
[    6.214157] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[    6.214728] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    6.344548] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[    6.344599] ath10k_pci 0000:01:00.0: Falling back to user helper
[    6.622837] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[    6.622876] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[    6.632916] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[    7.556229] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    7.672431] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[    8.672423] ath10k_pci 0000:01:00.0: unable to read from the device
[    8.672449] ath10k_pci 0000:01:00.0: could not execute otp for board id check: -110
[    8.677492] ath10k_pci 0000:01:00.0: failed to get board id from otp: -110
[    8.697481] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
[    8.697654] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 62700264
[   10.091984] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
[   10.156841] ath: EEPROM regdomain: 0x0
[   10.156851] ath: EEPROM indicates default country code should be used
[   10.156858] ath: doing EEPROM country->regdmn map search
[   10.156869] ath: country maps to regdmn code: 0x3a
[   10.156877] ath: Country alpha2 being used: US
[   10.156885] ath: Regpair used: 0x3a
[   10.168067] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[   10.168769] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   10.304348] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
[   10.304387] ath10k_pci 0001:01:00.0: Falling back to user helper
[   10.315323] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[   10.320108] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[   10.331654] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[   12.372412] ath10k_pci 0001:01:00.0: unable to read from the device
[   12.372440] ath10k_pci 0001:01:00.0: could not execute otp for board id check: -110
[   12.377482] ath10k_pci 0001:01:00.0: failed to get board id from otp: -110
[   12.385308] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
[   12.392137] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 62700264
[   13.791163] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
[   13.850316] ath: EEPROM regdomain: 0x0
[   13.850338] ath: EEPROM indicates default country code should be used
[   13.850355] ath: doing EEPROM country->regdmn map search
[   13.850376] ath: country maps to regdmn code: 0x3a
[   13.850392] ath: Country alpha2 being used: US
[   13.850407] ath: Regpair used: 0x3a
[   16.011756] device br0 entered promiscuous mode
[   16.071774] device vlan1 entered promiscuous mode
[   16.071798] device eth0 entered promiscuous mode
[   16.107753] device vlan2 entered promiscuous mode
[   16.111976] br0: port 2(vlan2) entered forwarding state
[   16.113256] br0: port 2(vlan2) entered forwarding state
[   16.118207] br0: port 1(vlan1) entered forwarding state
[   16.123463] br0: port 1(vlan1) entered forwarding state
[   16.128732] device br0 left promiscuous mode
[   16.136262] device br0 entered promiscuous mode
[   16.146292] device br0 left promiscuous mode
[   18.112399] br0: port 2(vlan2) entered forwarding state
[   18.122421] br0: port 1(vlan1) entered forwarding state
[   21.965484] device ath0 entered promiscuous mode
[   23.986998] br0: port 3(ath0) entered forwarding state
[   23.987032] br0: port 3(ath0) entered forwarding state
[   25.486447] device ath1 entered promiscuous mode
[   25.982376] br0: port 3(ath0) entered forwarding state
[   26.224984] br0: port 4(ath1) entered forwarding state
[   26.225080] br0: port 4(ath1) entered forwarding state
[   28.222405] br0: port 4(ath1) entered forwarding state