Linksys E3200

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 16:13, 30 December 2011 (edit)
Voducngh (Talk | contribs)

← Previous diff
Revision as of 16:53, 30 December 2011 (edit) (undo)
DasShrubber (Talk | contribs)
(Hardware Specifications)
Next diff →
Line 1: Line 1:
= Hardware Specifications = = Hardware Specifications =
-[[Image:e3200.jpg]][[Image:e3200.jpg]]+[[Image:Linksys_E3200.png|center]]

Revision as of 16:53, 30 December 2011

Hardware Specifications


CPU Broadcom BCM5357 500 MHz
Flash ROM Winbond 25Q128BUFG 16 MB
RAM EtronTech EM6AB160TSC-5G 32M x 16 bit 64 MB
Radios 2.4 GHz, 5 GHz
WLAN Support a/b/g/n
WLAN Max Speed 300 mbps
Antenna Location Internal
Switch BCM53125SKMMLG 4x GigE + 1 WAN
USB 1x USB 2.0


You can use some of these figures to come up with what Tx power rating would be best for you. As factory lists it a max of 20dBm then a setting of 100mW could be used as 20dBm = 100mW 17dBm = 50mW and so on.

2.4GHz output power per TX chain

802.11b: Max. 20.5dBm @ All rates

802.11g: Max. 20.5dBm @ Low rates

Max. 19.5dBm @ High rates

Wireless-N 20MHz: Max. 20.5dBm @ Low rates

Max. 18.5dBm @ High rates

Wireless-N 40MHz: Max. 17.0dBm @ All rates

5GHz output power per TX chain

UNII-1 (5150-5250GHz)

802.11a: Max. 14.0dBm @ All rates

Wireless-N 20MHz: Max. 11.5dBm @ All rates

Wireless-N 40MHz: Max. 12.0dBm @ All rates

UNII-3 (5725-5850GHz)

802.11a: Max. 17.5dBm @ High rates

802.11a: Max. 20.0dBm @ Low rates

Wireless-N 20MHz: Max. 17.5dBm @ High rates

Wireless-N 20MHz: Max. 20.0dBm @ Low rates

Wireless-N 40MHz: Max. 17.5dBm @ High rates

Wireless-N 40MHz: Max. 21.0dBm @ Low rates

Internal PIFA antennas are rated at 3dBi

Flashing instructions for the E3200