Linksys E3200

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 16:10, 30 December 2011 (edit)
Voducngh (Talk | contribs)
(New page: = Hardware Specifications = Image:e3200.jpgImage:e3200.jpg {| border="1" cellspacing="0" ! CPU | Broadcom BCM5357 |- ! CPU Speed | 500 MHz |- ! Flash ROM | 16 MB |- ! RAM | 64 ...)
← Previous diff
Revision as of 16:13, 30 December 2011 (edit) (undo)
Voducngh (Talk | contribs)

Next diff →
Line 7: Line 7:
! CPU ! CPU
| Broadcom BCM5357 | Broadcom BCM5357
-|- 
-! CPU Speed 
| 500 MHz | 500 MHz
|- |-
! Flash ROM ! Flash ROM
 +| Winbond 25Q128BUFG
| 16 MB | 16 MB
|- |-
! RAM ! RAM
 +| EtronTech EM6AB160TSC-5G 32M x 16 bit
| 64 MB | 64 MB
|- |-
Line 30: Line 30:
|- |-
! Switch ! Switch
 +| BCM53125SKMMLG
| 4x GigE + 1 WAN | 4x GigE + 1 WAN
|- |-

Revision as of 16:13, 30 December 2011

Hardware Specifications

Image:E3200.jpgImage:E3200.jpg


CPU Broadcom BCM5357 500 MHz
Flash ROM Winbond 25Q128BUFG 16 MB
RAM EtronTech EM6AB160TSC-5G 32M x 16 bit 64 MB
Radios 2.4 GHz, 5 GHz
WLAN Support a/b/g/n
WLAN Max Speed 300 mbps
Antenna Location Internal
Switch BCM53125SKMMLG 4x GigE + 1 WAN
USB 1x USB 2.0


You can use some of these figures to come up with what Tx power rating would be best for you. As factory lists it a max of 20dBm then a setting of 100mW could be used as 20dBm = 100mW 17dBm = 50mW and so on.

2.4GHz output power per TX chain

802.11b: Max. 20.5dBm @ All rates

802.11g: Max. 20.5dBm @ Low rates

Max. 19.5dBm @ High rates

Wireless-N 20MHz: Max. 20.5dBm @ Low rates

Max. 18.5dBm @ High rates

Wireless-N 40MHz: Max. 17.0dBm @ All rates

5GHz output power per TX chain

UNII-1 (5150-5250GHz)

802.11a: Max. 14.0dBm @ All rates

Wireless-N 20MHz: Max. 11.5dBm @ All rates

Wireless-N 40MHz: Max. 12.0dBm @ All rates

UNII-3 (5725-5850GHz)

802.11a: Max. 17.5dBm @ High rates

802.11a: Max. 20.0dBm @ Low rates

Wireless-N 20MHz: Max. 17.5dBm @ High rates

Wireless-N 20MHz: Max. 20.0dBm @ Low rates

Wireless-N 40MHz: Max. 17.5dBm @ High rates

Wireless-N 40MHz: Max. 21.0dBm @ Low rates

Internal PIFA antennas are rated at 3dBi

Flashing instructions for the E3200