Linksys E2000
From DD-WRT Wiki
Revision as of 02:08, 3 August 2010 (edit) Buddee (Talk | contribs) m ← Previous diff |
Revision as of 02:08, 3 August 2010 (edit) (undo) Buddee (Talk | contribs) m Next diff → |
||
Line 17: | Line 17: | ||
6) Power cycle by unplugging E2000 for 30 secs. | 6) Power cycle by unplugging E2000 for 30 secs. | ||
- | 7) Plug E2000 back in and wait about 5 minutes until it | + | 7) Plug E2000 back in and wait about 5 minutes until it finishes booting. |
8 ) Do a 30/30/30 reset on router. | 8 ) Do a 30/30/30 reset on router. |
Revision as of 02:08, 3 August 2010
This page reserved for Linksys E2000 only
Currently this page is a work in progress...
Flashing instructions for the E2000
1) Disconnect all cables and wireless clients.
2) Do a 30/30/30 reset on router.
3) Connect 1 Lan cable to pc doing the flash.
4) Log into Web Interface and flash the firmware ftp://ftp.dd-wrt.com/others/eko/V24-K26/svn14853/dd-wrt.v24-14853_NEWD-2_K2.6_big-e2000.bin
5) Wait 5 minutes until WAN light turns on.
6) Power cycle by unplugging E2000 for 30 secs.
7) Plug E2000 back in and wait about 5 minutes until it finishes booting.
8 ) Do a 30/30/30 reset on router.
9) Wait 3 minutes and log into web interface.
As of July 2010 you can only use the trailed builds with the e2000 name in it and nothing else, using other bin's without the e2000 name in it may result in a bricked unit!