Linksys E1000 v2.0

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 11:32, 11 May 2018 (edit)
Jeremywh7 (Talk | contribs)

← Previous diff
Current revision (20:47, 22 January 2020) (edit) (undo)
Jeremywh7 (Talk | contribs)
(add min build info)
 
Line 1: Line 1:
-E1000v2 thread for information and DD-WRT compatibility: [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=105008 "Linksys e1000v2 now supported"]<br>+'''This is for the E1000v2.''' For version 1 hardware see [[Linksys E1000]].
-This is for the E1000v2. For version 1 hardware see the [[Linksys E1000]] wiki.+
-==Hardware [https://wikidevi.com/wiki/Linksys_E1000_v2.0 Specs]==+==Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_E1000_v2.0 Specs]==
*FCC ID: Q87-E1000V2 *FCC ID: Q87-E1000V2
*Industry Canada ID: 3839A-E1000V2 *Industry Canada ID: 3839A-E1000V2
Line 11: Line 10:
*Wireless MIMO config: 2x2:2 *Wireless MIMO config: 2x2:2
*LAN / WAN: 4 / 1 (up to 100 Mb/s) *LAN / WAN: 4 / 1 (up to 100 Mb/s)
- 
==Install Procedure== ==Install Procedure==
-# Reference the [[Linksys E1000]] wiki for the general procedure and information+#Reference the [[Linksys E1000]] wiki for the general procedure and information
-# '''NOTE:''' use the v2 trailed mini build (named ''mini_e1000v2.bin'') from the broadcom_K26 folder.+#'''NOTE:''' use the ''mini_e1000v2.bin'' trailed build from the ''broadcom_K26'' folder.
-#* '''Do not use old ''mini_e1000.bin'' builds which are for v1 hardware''', prior to v2 support+#*Minimum build for '''v2.0 is 16758''' and for '''v2.1 is 16698'''
 +#*'''Do not use older ''mini_e1000.bin'' v1 builds''' which are prior to v2 support
 +#For upgrades use any non-trailed and non-nv6xk builds (e.g. K2.6_mini.bin) no bigger than 3712 KB (3801088 bytes)
 +==Serial Recovery==
 +#See ''Serial Recovery'' in the [[Linksys_E1000#Serial_Recovery|E1000 wiki]]
-==Serial Recovery==+==Reference==
-# Reference the [[Linksys E1000]] wiki+Forum threads: [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=105008 ''Linksys e1000v2 now supported''] and [https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=605776#605776 ''Linksys E1000 v2.1'']
[[Category:Linksys]] [[Category:Linksys]]

Current revision

This is for the E1000v2. For version 1 hardware see Linksys E1000.

Contents

[edit] Hardware Specs

  • FCC ID: Q87-E1000V2
  • Industry Canada ID: 3839A-E1000V2
  • CPU: Broadcom BCM5357B0 @300 MHz
  • Flash / RAM: 4 MiB / 32 MiB
  • Wireless/Ethernet/Switch chip: Broadcom BCM5357B0
  • Wireless protocols: bgn
  • Wireless MIMO config: 2x2:2
  • LAN / WAN: 4 / 1 (up to 100 Mb/s)

[edit] Install Procedure

  1. Reference the Linksys E1000 wiki for the general procedure and information
  2. NOTE: use the mini_e1000v2.bin trailed build from the broadcom_K26 folder.
    • Minimum build for v2.0 is 16758 and for v2.1 is 16698
    • Do not use older mini_e1000.bin v1 builds which are prior to v2 support
  3. For upgrades use any non-trailed and non-nv6xk builds (e.g. K2.6_mini.bin) no bigger than 3712 KB (3801088 bytes)

[edit] Serial Recovery

  1. See Serial Recovery in the E1000 wiki

[edit] Reference

Forum threads: Linksys e1000v2 now supported and Linksys E1000 v2.1