Linksys E1000 v2.0

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 18:22, 2 May 2011 (edit)
Phuzi0n (Talk | contribs)
(link to new v2 support thread)
← Previous diff
Revision as of 11:32, 11 May 2018 (edit) (undo)
Jeremywh7 (Talk | contribs)

Next diff →
Line 1: Line 1:
-Please see this thread for information on E1000 v2.0 and dd-wrt compatibility+E1000v2 thread for information and DD-WRT compatibility: [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=105008 "Linksys e1000v2 now supported"]<br>
-http://www.dd-wrt.com/phpBB2/viewtopic.php?t=105008+This is for the E1000v2. For version 1 hardware see the [[Linksys E1000]] wiki.
 +==Hardware [https://wikidevi.com/wiki/Linksys_E1000_v2.0 Specs]==
 +*FCC ID: Q87-E1000V2
 +*Industry Canada ID: 3839A-E1000V2
 +*CPU: Broadcom BCM5357B0 @300 MHz
 +*Flash / RAM: 4 MiB / 32 MiB
 +*Wireless/Ethernet/Switch chip: Broadcom BCM5357B0
 +*Wireless protocols: bgn
 +*Wireless MIMO config: 2x2:2
 +*LAN / WAN: 4 / 1 (up to 100 Mb/s)
 +
 +
 +==Install Procedure==
 +# Reference the [[Linksys E1000]] wiki for the general procedure and information
 +# '''NOTE:''' use the v2 trailed mini build (named ''mini_e1000v2.bin'') from the broadcom_K26 folder.
 +#* '''Do not use old ''mini_e1000.bin'' builds which are for v1 hardware''', prior to v2 support
 +
 +
 +==Serial Recovery==
 +# Reference the [[Linksys E1000]] wiki
[[Category:Linksys]] [[Category:Linksys]]

Revision as of 11:32, 11 May 2018

E1000v2 thread for information and DD-WRT compatibility: "Linksys e1000v2 now supported"
This is for the E1000v2. For version 1 hardware see the Linksys E1000 wiki.

Hardware Specs

  • FCC ID: Q87-E1000V2
  • Industry Canada ID: 3839A-E1000V2
  • CPU: Broadcom BCM5357B0 @300 MHz
  • Flash / RAM: 4 MiB / 32 MiB
  • Wireless/Ethernet/Switch chip: Broadcom BCM5357B0
  • Wireless protocols: bgn
  • Wireless MIMO config: 2x2:2
  • LAN / WAN: 4 / 1 (up to 100 Mb/s)


Install Procedure

  1. Reference the Linksys E1000 wiki for the general procedure and information
  2. NOTE: use the v2 trailed mini build (named mini_e1000v2.bin) from the broadcom_K26 folder.
    • Do not use old mini_e1000.bin builds which are for v1 hardware, prior to v2 support


Serial Recovery

  1. Reference the Linksys E1000 wiki