LaFonera Software Wireless-Repeater

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 12:18, 14 May 2010 (edit)
Glenn (Talk | contribs)
← Previous diff
Current revision (16:36, 10 March 2011) (edit) (undo)
Markus (Talk | contribs)

Line 1: Line 1:
[[Category:LaFonera_Software_(en)]] [[Category:LaFonera_Software_(en)]]
You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera_(en)|LaFonera]] / [[:Category:LaFonera_Software_(en)|Software]] / LaFonera_Software_Wireless-Repeater''' You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera_(en)|LaFonera]] / [[:Category:LaFonera_Software_(en)|Software]] / LaFonera_Software_Wireless-Repeater'''
Line 6: Line 5:
From [] From []
This is a "Repeater Mode" This is a "Repeater Mode"

Current revision

You are here: DD-WRT wiki mainpage / LaFonera / Software / LaFonera_Software_Wireless-Repeater

From [1]

This is a "Repeater Mode"

Primary access point (AP1)

Ip: Subnet mask DHCP enable From to SSId="Net" Wifi auth WPA Passkey=xxxx

Fonera settings:

Setup > Basic setup: Connection Type : Automatic Configuration DHCP (because my primary access point use DHCP) STP: Disable (don't know why) Router Name : Whatever you want..i used Repeater Router IP: Local IP Address: (because my main router assign number from .100 to .150) Subnet mask: (The same of main router) Gateway: (The same of main router) Local DNS: (The same of main router) Network Address Server Settings (DHCP) DHCP Type= DHCP Server (I will assign ip also to laptop connected wireless or wired to fonera) Start ip address: (I could use also from .151 because from .100 to .150 are used by my main router) Maximum DHCP Users: 44 (Because is used by my main router)

Setup>Advanced Routing: Operating mode: Rip2 Router

Wireless > Basic settings Regulatory Domain: (ITALY) Wireless Mode: Client Bridge (Don't worry..You will use ath0 for client bridge and a virtual interface for accept also WIFI users in fonera) Wireless Network Name: Net (the same as main router) Virtual Interfaces (add one): Wireless Network Name(SSID): Net2 Wireless Mode: AP

Wireless > Wireless Security Wireless Security (ath0) Security Mode (WPA Personal) (the same kind of the main router) WPA Algorithms: TKIP (the same of main router) WPA Shared Key: xxxx(the same passphrase of the main router) Virtual Interfaces (ath1) Security Mode: WPA Personal WPA Algorithms: TKIP WPA Shared Key: yyyy

Status>Wireless>Site Survey>Join the SSID of main router for connect fonera (and estabilish the client bridge)