LaFonera Software Wireless-Repeater

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 22:04, 1 November 2008 (edit)
Sanist (Talk | contribs)

← Previous diff
Revision as of 11:39, 14 May 2010 (edit) (undo)
Glenn (Talk | contribs)
(-cats)
Next diff →
Line 1: Line 1:
-[[Category:LaFonera]]+ 
-[[Category:LaFonera_(en)]]+
[[Category:LaFonera_Software]] [[Category:LaFonera_Software]]
[[Category:LaFonera_Software_(en)]] [[Category:LaFonera_Software_(en)]]

Revision as of 11:39, 14 May 2010

You are here: DD-WRT wiki mainpage / LaFonera / Software / LaFonera_Software_Wireless-Repeater


From [1]

This is a "Repeater Mode"

Primary access point (AP1)

Ip: 192.168.1.254 Subnet mask 255.255.255.0 DHCP enable From 192.168.1.100 to 192.168.1.150 SSId="Net" Wifi auth WPA Passkey=xxxx


Fonera settings:

Setup > Basic setup: Connection Type : Automatic Configuration DHCP (because my primary access point use DHCP) STP: Disable (don't know why) Router Name : Whatever you want..i used Repeater Router IP: Local IP Address: 192.168.1.120 (because my main router assign number from .100 to .150) Subnet mask: 255.255.255.0 (The same of main router) Gateway: 192.168.1.254 (The same of main router) Local DNS: 192.168.1.254 (The same of main router) Network Address Server Settings (DHCP) DHCP Type= DHCP Server (I will assign ip also to laptop connected wireless or wired to fonera) Start ip address: 192.168.1.200 (I could use also from .151 because from .100 to .150 are used by my main router) Maximum DHCP Users: 44 (Because 192.168.1.254 is used by my main router)

Setup>Advanced Routing: Operating mode: Rip2 Router

Wireless > Basic settings Regulatory Domain: (ITALY) Wireless Mode: Client Bridge (Don't worry..You will use ath0 for client bridge and a virtual interface for accept also WIFI users in fonera) Wireless Network Name: Net (the same as main router) Virtual Interfaces (add one): Wireless Network Name(SSID): Net2 Wireless Mode: AP

Wireless > Wireless Security Wireless Security (ath0) Security Mode (WPA Personal) (the same kind of the main router) WPA Algorithms: TKIP (the same of main router) WPA Shared Key: xxxx(the same passphrase of the main router) Virtual Interfaces (ath1) Security Mode: WPA Personal WPA Algorithms: TKIP WPA Shared Key: yyyy

Status>Wireless>Site Survey>Join the SSID of main router for connect fonera (and estabilish the client bridge)

Enjoy...