LaFonera Info Hardware-Specifications

From DD-WRT Wiki

Revision as of 01:18, 2 March 2007 by Wildblue (Talk | contribs)
Jump to: navigation, search

You are here: DD-WRT wiki mainpage / LaFonera / Info / Hardware-Specifications

The Hardware Specifications

  • CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz
  • RAM: Hynix hy57v281620etp-h - 16 MB
  • Flash: ST(84) H - 25P64V6P - MYS 636 - 8 MB
  • Ethernet: (1x) Altima AC101 (10/100 Mbit/s) (Auto crossover)
  • Wireless: IEEE 802.11b / 802.11g (up to 54 Mbps)
  • Antenna Connector: RP-SMA Connector (Reverse SMA)
  • Antenna Omni-Directional detachable antenna (2dBi)
  • Dimensions: 93.5 mm x 25.5 mm x 70 mm (excluding antenna)
  • Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V DC, 2.0A Output
  • Power Consumption: 4 Watt
  • Reset Switch


Environment Requirement

LaFonera complies with the following standards:

  • Temperature: IEC* 68-2-14

0 to 40 degrees C (Standard Operating)

0 to 70 degree C (Non-operation)

  • Humidity: 5% to 95% (Non-condensing)
  • Vibration: IEC 68-2-36, IEC 68-2-6
  • Shock: IEC 68-2-29
  • Drop: IEC 68-2-32

This device is actually made by Accton Accton Home Page


*IEC (International Electrotechnical Commission)