LaFonera Info Hardware-Specifications

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 03:43, 15 January 2007 (edit)
Wildblue (Talk | contribs)

← Previous diff
Revision as of 14:37, 17 January 2007 (edit) (undo)
Kilhak (Talk | contribs)

Next diff →
Line 11: Line 11:
* Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V, 2.0A DC output * Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V, 2.0A DC output
* Power Consumption: 4 Watt * Power Consumption: 4 Watt
-* Reset Switch (only Brainslayer doesn't have one :-))+* Reset Switch (only Brainslayer do not have one :-))

Revision as of 14:37, 17 January 2007

Back to La Fonera

  • CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz
  • RAM: 16 mb
  • Flash: 8 MB
  • Ethernet: (1x) Altima AC101 (10/100 Mbit/s)
  • Wireless: IEEE 802.11b / 802.11g (up to 54 Mbps)
  • Antenna Connector: RP-SMA Connector (Reverse SMA)
  • Antenna Omni-Directional detachable antenna (2dBi)
  • Dimensions: 93.5 mm x 25.5 mm x 70 mm (excluding antenna)
  • Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V, 2.0A DC output
  • Power Consumption: 4 Watt
  • Reset Switch (only Brainslayer do not have one :-))


Environment Requirement

La Fonera complies with the following standards:

  • Temperature: IEC* 68-2-14

0 to 40 degrees C (Standard Operating)

0 to 70 degree C (Non-operation)

  • Humidity: 5% to 95% (Non-condensing)
  • Vibration: IEC 68-2-36, IEC 68-2-6
  • Shock: IEC 68-2-29
  • Drop: IEC 68-2-32

This device is actually made by Accton Accton Home Page


*IEC (International Electrotechnical Commission)