LaFonera Info Hardware-Specifications
From DD-WRT Wiki
Revision as of 21:35, 26 February 2007 (edit) Wildblue (Talk | contribs) ← Previous diff |
Current revision (11:56, 14 May 2010) (edit) (undo) Glenn (Talk | contribs) (-cat) |
||
(19 intermediate revisions not shown.) | |||
Line 1: | Line 1: | ||
- | You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[ | + | |
+ | [[Category:LaFonera_(en)]] | ||
+ | You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera_(en)|LaFonera]] / [[LaFonera_Info|Info]] / Hardware-Specifications''' | ||
== The Hardware Specifications == | == The Hardware Specifications == | ||
+ | === Model 2100 === | ||
* CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz | * CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz | ||
* RAM: Hynix hy57v281620etp-h - 16 MB | * RAM: Hynix hy57v281620etp-h - 16 MB | ||
* Flash: ST(84) H - 25P64V6P - MYS 636 - 8 MB | * Flash: ST(84) H - 25P64V6P - MYS 636 - 8 MB | ||
- | * Ethernet: (1x) Altima AC101 (10/100 Mbit/s) | + | * Ethernet: (1x) Altima AC101 (10/100 Mbit/s) [Auto-MDI(X)] |
* Wireless: IEEE 802.11b / 802.11g (up to 54 Mbps) | * Wireless: IEEE 802.11b / 802.11g (up to 54 Mbps) | ||
* Antenna Connector: RP-SMA Connector (Reverse SMA) | * Antenna Connector: RP-SMA Connector (Reverse SMA) | ||
Line 14: | Line 17: | ||
* Reset Switch | * Reset Switch | ||
+ | === Model 2200 === | ||
+ | |||
+ | * CPU: Same as 2100. | ||
+ | * RAM: Same as 2100. | ||
+ | * Flash: Same as 2100. | ||
+ | * Ethernet: Same as 2100? | ||
+ | * Wireless: Same as 2100. | ||
+ | * Antenna Connector: same as 2100. | ||
+ | * Antenna: Same as 2100. | ||
+ | * Dimensions: Same as 2100. | ||
+ | * Powersupply: 7.5v, 1A Output | ||
+ | * Redesigned PCB, possibly cooler? | ||
+ | * No extra pad for a second antenna. Possible internal PCB antenna? | ||
+ | * Serial port on JP1. Pin closest to Ethernet jack is GND, RX, TX, Power. (I may have RX and TX swapped [[User:Daemondust|Daemondust]] 19:19, 26 Apr 2007 (CEST)) | ||
+ | |||
+ | (see http://zone-sys.net/fon2200/) | ||
+ | |||
+ | === Model 2100 === | ||
Environment Requirement | Environment Requirement | ||
Line 27: | Line 48: | ||
* Drop: IEC 68-2-32 | * Drop: IEC 68-2-32 | ||
- | This device is actually made by Accton | + | |
+ | This device is actually made by Accton [http://www.accton.com/ Accton Home Page] as shown doing a search on Fonera's FCC-ID in the FCC database. | ||
+ | |||
+ | A look at the various test reports and external photos shows that this device is provided also under the Trade(Model) Names | ||
+ | |||
+ | * ACCTON MR3201A | ||
+ | * FON FON2100A,B,C and F | ||
+ | * Edge-Core WA3101 | ||
+ | * Philips SNR6500 | ||
+ | * SMC WEBT-G | ||
+ | * Siemens Gigaset Wlan repeater 108 | ||
+ | |||
+ | Copies of the mentioned FCC-documents may also be found at http://mobileaccess.de/fonera/ | ||
<nowiki>*IEC (International Electrotechnical Commission)</nowiki> | <nowiki>*IEC (International Electrotechnical Commission)</nowiki> | ||
+ | |||
+ | ===LaFonera+=== | ||
+ | [[Image:Fonera%2B_External.jpg|thumb|right|LaFonera+ case.]] | ||
+ | [[Image:Fonera+ PCB Front.jpg|thumb|right|LaFonera+ PCB top. ]] | ||
+ | [[Image:Fonera+ PCB Back.jpg|thumb|right|LaFonera+ PCB bottom. ]] | ||
+ | |||
+ | The latest alliteration of the LaFonera has 2 Ethernet ports, new web interface, and seems to be locked down harder than ever. | ||
+ | |||
+ | * CPU: Unknown, probably same as 2100. | ||
+ | * RAM: 16MB | ||
+ | * Flash: 8MB | ||
+ | * Ethernet: 2 Ethernet ports, one LAN, one WAN. | ||
+ | * Wireless: Unknown, probably same as 2100. | ||
+ | * Antenna Connector: RP-SMA Connector (Reverse SMA) | ||
+ | * Antenna: Omni-Directional detachable antenna (1.5dBi) | ||
+ | * Dimensions: 93.5 mm x 25.5 mm x 110 mm (excluding antenna) | ||
+ | * Powersupply: Unknown | ||
+ | * Redesigned PCB | ||
+ | * PCB has layout and room for? (Probably an USB port) | ||
+ | * Serial port on JP1. <br> | ||
+ | 1 = GND<br> | ||
+ | 2 = Tx<br> | ||
+ | 3 = Rx<br> | ||
+ | 4 = Vcc<br> | ||
+ | Pin furthest from Ethernet jack is 1.<br> | ||
+ | Serial port is no use according to[http://www.francofon.fr/news-article-81-La-Fonera---en-details--Tout-sur-la-Fonera-Plus]. | ||
+ | * Appears to be a JTAG header below JP1 | ||
+ | |||
+ | =References= | ||
+ | * http://wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs | ||
+ | * http://zone-sys.net/fon2/ Model 2200 pictures | ||
+ | * [http://www.francofon.fr/news-article-81-La-Fonera---en-details--Tout-sur-la-Fonera-Plus French article on the LaFonera+ with internal photos and booting serial port output] ([http://babelfish.yahoo.com/translate_url?doit=done&tt=url&intl=1&fr=bf-home&trurl=http%3A%2F%2Fwww.francofon.fr%2Fnews-article-81-La-Fonera---en-details--Tout-sur-la-Fonera-Plus&lp=fr_en&btnTrUrl=Translate english machine translation]) |
Current revision
You are here: DD-WRT wiki mainpage / LaFonera / Info / Hardware-Specifications
Contents |
[edit] The Hardware Specifications
[edit] Model 2100
- CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz
- RAM: Hynix hy57v281620etp-h - 16 MB
- Flash: ST(84) H - 25P64V6P - MYS 636 - 8 MB
- Ethernet: (1x) Altima AC101 (10/100 Mbit/s) [Auto-MDI(X)]
- Wireless: IEEE 802.11b / 802.11g (up to 54 Mbps)
- Antenna Connector: RP-SMA Connector (Reverse SMA)
- Antenna Omni-Directional detachable antenna (2dBi)
- Dimensions: 93.5 mm x 25.5 mm x 70 mm (excluding antenna)
- Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V DC, 2.0A Output
- Power Consumption: 4 Watt
- Reset Switch
[edit] Model 2200
- CPU: Same as 2100.
- RAM: Same as 2100.
- Flash: Same as 2100.
- Ethernet: Same as 2100?
- Wireless: Same as 2100.
- Antenna Connector: same as 2100.
- Antenna: Same as 2100.
- Dimensions: Same as 2100.
- Powersupply: 7.5v, 1A Output
- Redesigned PCB, possibly cooler?
- No extra pad for a second antenna. Possible internal PCB antenna?
- Serial port on JP1. Pin closest to Ethernet jack is GND, RX, TX, Power. (I may have RX and TX swapped Daemondust 19:19, 26 Apr 2007 (CEST))
(see http://zone-sys.net/fon2200/)
[edit] Model 2100
Environment Requirement
LaFonera complies with the following standards:
- Temperature: IEC* 68-2-14
0 to 40 degrees C (Standard Operating)
0 to 70 degree C (Non-operation)
- Humidity: 5% to 95% (Non-condensing)
- Vibration: IEC 68-2-36, IEC 68-2-6
- Shock: IEC 68-2-29
- Drop: IEC 68-2-32
This device is actually made by Accton Accton Home Page as shown doing a search on Fonera's FCC-ID in the FCC database.
A look at the various test reports and external photos shows that this device is provided also under the Trade(Model) Names
* ACCTON MR3201A * FON FON2100A,B,C and F * Edge-Core WA3101 * Philips SNR6500 * SMC WEBT-G * Siemens Gigaset Wlan repeater 108
Copies of the mentioned FCC-documents may also be found at http://mobileaccess.de/fonera/
*IEC (International Electrotechnical Commission)
[edit] LaFonera+
The latest alliteration of the LaFonera has 2 Ethernet ports, new web interface, and seems to be locked down harder than ever.
- CPU: Unknown, probably same as 2100.
- RAM: 16MB
- Flash: 8MB
- Ethernet: 2 Ethernet ports, one LAN, one WAN.
- Wireless: Unknown, probably same as 2100.
- Antenna Connector: RP-SMA Connector (Reverse SMA)
- Antenna: Omni-Directional detachable antenna (1.5dBi)
- Dimensions: 93.5 mm x 25.5 mm x 110 mm (excluding antenna)
- Powersupply: Unknown
- Redesigned PCB
- PCB has layout and room for? (Probably an USB port)
- Serial port on JP1.
1 = GND
2 = Tx
3 = Rx
4 = Vcc
Pin furthest from Ethernet jack is 1.
Serial port is no use according to[1].
- Appears to be a JTAG header below JP1
[edit] References
- http://wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs
- http://zone-sys.net/fon2/ Model 2200 pictures
- French article on the LaFonera+ with internal photos and booting serial port output (english machine translation)