LaFonera Info Hardware-Specifications
From DD-WRT Wiki
(Difference between revisions)
Revision as of 09:00, 2 March 2007 (edit) Twein (Talk | contribs) m (→References) ← Previous diff |
Revision as of 17:53, 25 April 2007 (edit) (undo) Daemondust (Talk | contribs) (start of adding model 2200 to article) Next diff → |
||
Line 3: | Line 3: | ||
== The Hardware Specifications == | == The Hardware Specifications == | ||
+ | === Model 2100 === | ||
* CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz | * CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz | ||
* RAM: Hynix hy57v281620etp-h - 16 MB | * RAM: Hynix hy57v281620etp-h - 16 MB | ||
Line 15: | Line 16: | ||
* Reset Switch | * Reset Switch | ||
+ | === Model 2200 === | ||
+ | |||
+ | * CPU: Same as 2100. | ||
+ | * RAM: Same as 2100. | ||
+ | * Flash: Same as 2100. | ||
+ | * Ethernet: Same as 2100? | ||
+ | * Wireless: Same as 2100. | ||
+ | * Antenna Connector: same as 2100. | ||
+ | * Antenna: Same as 2100. | ||
+ | * Dimensions: Same as 2100. | ||
+ | * Powersupply: 7.5v, 1A Output | ||
+ | * Redesigned PCB, possibly cooler? | ||
+ | * No extra pad for a second antenna. | ||
+ | * No serial port. | ||
+ | |||
+ | === Model 2100 === | ||
Environment Requirement | Environment Requirement | ||
Line 48: | Line 65: | ||
=References= | =References= | ||
* http://wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs | * http://wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs | ||
+ | * http://zone-sys.net/fon2/ Model 2200 pictures |
Revision as of 17:53, 25 April 2007
You are here: DD-WRT wiki mainpage / LaFonera / Info / Hardware-Specifications
Contents |
The Hardware Specifications
Model 2100
- CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz
- RAM: Hynix hy57v281620etp-h - 16 MB
- Flash: ST(84) H - 25P64V6P - MYS 636 - 8 MB
- Ethernet: (1x) Altima AC101 (10/100 Mbit/s) (Auto crossover)
- Wireless: IEEE 802.11b / 802.11g (up to 54 Mbps)
- Antenna Connector: RP-SMA Connector (Reverse SMA)
- Antenna Omni-Directional detachable antenna (2dBi)
- Dimensions: 93.5 mm x 25.5 mm x 70 mm (excluding antenna)
- Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V DC, 2.0A Output
- Power Consumption: 4 Watt
- Reset Switch
Model 2200
- CPU: Same as 2100.
- RAM: Same as 2100.
- Flash: Same as 2100.
- Ethernet: Same as 2100?
- Wireless: Same as 2100.
- Antenna Connector: same as 2100.
- Antenna: Same as 2100.
- Dimensions: Same as 2100.
- Powersupply: 7.5v, 1A Output
- Redesigned PCB, possibly cooler?
- No extra pad for a second antenna.
- No serial port.
Model 2100
Environment Requirement
LaFonera complies with the following standards:
- Temperature: IEC* 68-2-14
0 to 40 degrees C (Standard Operating)
0 to 70 degree C (Non-operation)
- Humidity: 5% to 95% (Non-condensing)
- Vibration: IEC 68-2-36, IEC 68-2-6
- Shock: IEC 68-2-29
- Drop: IEC 68-2-32
This device is actually made by Accton Accton Home Page as shown doing a search on Fonera's FCC-ID in the FCC database.
A look at the various test reports and external photos shows that this device is provided also under the Trade(Model) Names
* ACCTON MR3201A * FON FON2100A,B,C and F * Edge-Core WA3101 * Philips SNR6500 * SMC WEBT-G * Siemens Gigaset Wlan repeater 108
Copies of the mentioned FCC-documents may also be found at http://mobileaccess.de/fonera/
*IEC (International Electrotechnical Commission)
References
- http://wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs
- http://zone-sys.net/fon2/ Model 2200 pictures