LaFonera Hardware Second-Antenna

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 14:53, 5 March 2007 (edit)
Pepsimax2k (Talk | contribs)
(Soldering)
← Previous diff
Revision as of 16:01, 5 March 2007 (edit) (undo)
Hal (Talk | contribs)
(Uploaded the imageshack images to the Wiki, and screwed around with the formatting a bit. @Pepsimax2k: by default the antenna is soldered to ANT2 not 1, he did not change it.)
Next diff →
Line 3: Line 3:
You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera|LaFonera]] / [[LaFonera_Hardware|Hardware]] / Second-Antenna''' You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera|LaFonera]] / [[LaFonera_Hardware|Hardware]] / Second-Antenna'''
-= Howto attach a second Antenna to your LaFonera = 
 +[[Image:La_fonera_internal.jpg|thumb|right|Stock la fonera PCB showing unused antenna connection.]]
Adding a second antenna is not hard. Since I recently used these wiki pages to help me along the process up getting dd-wrt onto my fonera, I figured that I might as well make a contribution. Adding a second antenna is not hard. Since I recently used these wiki pages to help me along the process up getting dd-wrt onto my fonera, I figured that I might as well make a contribution.
The process should be pretty self explainitory, though I'm sure others may have other things they can contribute to this for better performance. The process should be pretty self explainitory, though I'm sure others may have other things they can contribute to this for better performance.
The first thing that I noticed upon opening my fonera was that where the antenna connected to the PCB there was a second free connection. The points on the board were labled Ant1 and Ant2 (interestingly enough, the one that is attached at factory is Ant2). So I knew right away I'd be connecting this up ASAP for better performance. The first thing that I noticed upon opening my fonera was that where the antenna connected to the PCB there was a second free connection. The points on the board were labled Ant1 and Ant2 (interestingly enough, the one that is attached at factory is Ant2). So I knew right away I'd be connecting this up ASAP for better performance.
 +__TOC__
-Below is an image of a stock la fonera internal.+=Making room for the second antenna=
- +
-[http://img262.imageshack.us/my.php?image=dremelinsideal8.jpg http://img262.imageshack.us/img262/9097/dremelinsideal8.th.jpg]+
- +
-= Step One =+
- +
-== Making room for the second antenna ==+
The first thing that must be done is to make a hole to connect your second antenna connector to. You can do this with a drill, dremel, etc. Whatever works. Be sure to plan out exactly where it will go. I have chosen to use bigger omni directional antenna's than the stock 2db one. Because of the range of movement the antennas that I used will have, I had to make the hole for the second antenna slightly off centered. That allows me to leave the 2 antennas at 90degrees of one another without rubbing at the base. The first thing that must be done is to make a hole to connect your second antenna connector to. You can do this with a drill, dremel, etc. Whatever works. Be sure to plan out exactly where it will go. I have chosen to use bigger omni directional antenna's than the stock 2db one. Because of the range of movement the antennas that I used will have, I had to make the hole for the second antenna slightly off centered. That allows me to leave the 2 antennas at 90degrees of one another without rubbing at the base.
 +[[Image:FON_dremel_outside.jpg|thumb|none|Image of the hole that I dremeled.]]
-Below is an image of the hole that I dremeled. 
- 
-[http://img262.imageshack.us/my.php?image=dremeloutsideuv9.jpg http://img262.imageshack.us/img262/682/dremeloutsideuv9.th.jpg] 
- 
- 
-= Step Two = 
- 
-== Soldering == 
 +=Soldering=
Time to warm up the soldering iron. This process is fairly simple, though you must be careful not to allow for any bridging. The wire casing for an antenna can be tricky. Within the outer casing is wiring for a ground. Below that is another plastic casing. Within that is the actual antenna cable. Time to warm up the soldering iron. This process is fairly simple, though you must be careful not to allow for any bridging. The wire casing for an antenna can be tricky. Within the outer casing is wiring for a ground. Below that is another plastic casing. Within that is the actual antenna cable.
This is a simple drawing showing the cabling layout. The black layers represent casing, grey for wire. This is a simple drawing showing the cabling layout. The black layers represent casing, grey for wire.
-http://img176.imageshack.us/img176/3481/antwirezd2.jpg+[[Image:Antena_cable.jpg]]
The area in red below is where you will actually be soldering. The area in red below is where you will actually be soldering.
-[http://img150.imageshack.us/my.php?image=solderherehb7.jpg http://img150.imageshack.us/img150/7200/solderherehb7.th.jpg]+[[Image:Solder_here.jpg|thumb|none|Second antenna connection point is circled in red.]]
The outer perimeter of this area contains 7.5 solder pads. Any of these can be used for the ground. In the center is where you solder the antenna wire. The outer perimeter of this area contains 7.5 solder pads. Any of these can be used for the ground. In the center is where you solder the antenna wire.
-Here is a picture of the completed soldering. Note that the original antenna wire has been moved on to the Ant2 connection on the PCB, and the new antenna wire has been soldered to the Ant1 connection, not that this should make much of a difference as both connectors have had larger omni directional antennae added to them.+[[Image:Second_antena.jpg|thumb|none|The completed soldering]]
-[http://img262.imageshack.us/my.php?image=secondantic0.jpg http://img262.imageshack.us/img262/7074/secondantic0.th.jpg] 
-= Step Three = +=Connecting Antenna=
- +
-== Connecting Antenna ==+
Probably the simplest of all steps, connect the RP-SMA connector to the unit. Simply push the connector through the hole you cut in step 1, and attach the washer and nut to secure it into place. For me, it was easiest to cross the connectors to the opposide side as they are on due to the length of the wire I used. This is definately not required. Probably the simplest of all steps, connect the RP-SMA connector to the unit. Simply push the connector through the hole you cut in step 1, and attach the washer and nut to secure it into place. For me, it was easiest to cross the connectors to the opposide side as they are on due to the length of the wire I used. This is definately not required.
-Here is an internal picture with soldering completed and RP-SMA connector in place+Here is an internal picture with soldering completed and RP-SMA connector in place:
-[http://img262.imageshack.us/my.php?image=secondantic0.jpg http://img262.imageshack.us/img262/7074/secondantic0.th.jpg]+[[Image:Second_antena.jpg|thumb|none|The completed soldering]]
-And an outside picture+And an outside picture:
-[http://img176.imageshack.us/my.php?image=twosmath8.jpg http://img176.imageshack.us/img176/1134/twosmath8.th.jpg]+[[Image:Two_RPSMA.jpg|thumb|none|Dual RP-SMA connectors.]]
- +=Attach the antennas=
-= Step Four =+
- +
-== Attach the antennas ==+
As mentioned above, I have chosen to go with a larger antenna with slightly more gain. Afterall, that is the main point in adding the second antenna right? As mentioned above, I have chosen to go with a larger antenna with slightly more gain. Afterall, that is the main point in adding the second antenna right?
Line 68: Line 51:
Simply screw your antenna in and position them how you see fit. Keep in mind the signal travels at a 90degree to the antenna. Simply screw your antenna in and position them how you see fit. Keep in mind the signal travels at a 90degree to the antenna.
-= Step Five =+=Signal Strength Testing=
- +
-== Signal Strength Testing ==+
- +
I did a walk through of my house to several locations upstairs and down after adding the second antenna. I used the Windows tool 'Net Stumbler' to graph out the signal strengths with no antenna, one antenna, and both antennas. I also graphed with both the originally connected antenna and the second that I added. I did a walk through of my house to several locations upstairs and down after adding the second antenna. I used the Windows tool 'Net Stumbler' to graph out the signal strengths with no antenna, one antenna, and both antennas. I also graphed with both the originally connected antenna and the second that I added.
Line 79: Line 59:
I noted what were almost double SNR ratings. At the furthest point in my house from the La Fonera, and in the basement, SNR with one antenna was ~20dB. With the second antenna attached i got ~38dB. I noted what were almost double SNR ratings. At the furthest point in my house from the La Fonera, and in the basement, SNR with one antenna was ~20dB. With the second antenna attached i got ~38dB.
-= Step Six =+=Configure DD-WRT=
-== Configure DD-WRT ==+
'''This step may be optional. Someone please confirm''' '''This step may be optional. Someone please confirm'''
Line 89: Line 68:
These settings are under Wireless settings in the web interface. These settings are under Wireless settings in the web interface.
-= Final Product =+=Final Product=
Below is a side by side image of the original and the modified La Fonera. Below is a side by side image of the original and the modified La Fonera.
-[http://img241.imageshack.us/my.php?image=sidebysidecp1.jpg http://img241.imageshack.us/img241/3589/sidebysidecp1.th.jpg]+[[Image:FON_side_by_side2.jpg|frame.]]
--[[User:Psilocybe|Psilocybe]] 02:38, 5 Mar 2007 (CET) --[[User:Psilocybe|Psilocybe]] 02:38, 5 Mar 2007 (CET)

Revision as of 16:01, 5 March 2007

You are here: DD-WRT wiki mainpage / LaFonera / Hardware / Second-Antenna


Stock la fonera PCB showing unused antenna connection.
Stock la fonera PCB showing unused antenna connection.

Adding a second antenna is not hard. Since I recently used these wiki pages to help me along the process up getting dd-wrt onto my fonera, I figured that I might as well make a contribution.

The process should be pretty self explainitory, though I'm sure others may have other things they can contribute to this for better performance. The first thing that I noticed upon opening my fonera was that where the antenna connected to the PCB there was a second free connection. The points on the board were labled Ant1 and Ant2 (interestingly enough, the one that is attached at factory is Ant2). So I knew right away I'd be connecting this up ASAP for better performance.

Contents


Making room for the second antenna

The first thing that must be done is to make a hole to connect your second antenna connector to. You can do this with a drill, dremel, etc. Whatever works. Be sure to plan out exactly where it will go. I have chosen to use bigger omni directional antenna's than the stock 2db one. Because of the range of movement the antennas that I used will have, I had to make the hole for the second antenna slightly off centered. That allows me to leave the 2 antennas at 90degrees of one another without rubbing at the base.

Image of the hole that I dremeled.
Image of the hole that I dremeled.


Soldering

Time to warm up the soldering iron. This process is fairly simple, though you must be careful not to allow for any bridging. The wire casing for an antenna can be tricky. Within the outer casing is wiring for a ground. Below that is another plastic casing. Within that is the actual antenna cable.

This is a simple drawing showing the cabling layout. The black layers represent casing, grey for wire.

Image:Antena_cable.jpg

The area in red below is where you will actually be soldering.

Second antenna connection point is circled in red.
Second antenna connection point is circled in red.

The outer perimeter of this area contains 7.5 solder pads. Any of these can be used for the ground. In the center is where you solder the antenna wire.

The completed soldering
The completed soldering


Connecting Antenna

Probably the simplest of all steps, connect the RP-SMA connector to the unit. Simply push the connector through the hole you cut in step 1, and attach the washer and nut to secure it into place. For me, it was easiest to cross the connectors to the opposide side as they are on due to the length of the wire I used. This is definately not required.

Here is an internal picture with soldering completed and RP-SMA connector in place:

The completed soldering
The completed soldering

And an outside picture:

Dual RP-SMA connectors.
Dual RP-SMA connectors.

Attach the antennas

As mentioned above, I have chosen to go with a larger antenna with slightly more gain. Afterall, that is the main point in adding the second antenna right?

Simply screw your antenna in and position them how you see fit. Keep in mind the signal travels at a 90degree to the antenna.

Signal Strength Testing

I did a walk through of my house to several locations upstairs and down after adding the second antenna. I used the Windows tool 'Net Stumbler' to graph out the signal strengths with no antenna, one antenna, and both antennas. I also graphed with both the originally connected antenna and the second that I added.

If you test your signal strength and find that you have no difference between one and two antennas, it may signify a problem with your soldering.

I noted what were almost double SNR ratings. At the furthest point in my house from the La Fonera, and in the basement, SNR with one antenna was ~20dB. With the second antenna attached i got ~38dB.

Configure DD-WRT

This step may be optional. Someone please confirm

Though I did have outstanding results without performing the following steps, the following should help even more. Within DD-WRT lies a setting for antennas. Enable "Antenna Diversity", which allows the La Fonera to use the two antennas in a proper fashion. Next choose whether or not you want one antenna to do transmitting and one receiving, of if you want them to both work equally. I currently use Diversity for Transmit and Diversity for Receive.

These settings are under Wireless settings in the web interface.

Final Product

Below is a side by side image of the original and the modified La Fonera.

frame.

--Psilocybe 02:38, 5 Mar 2007 (CET)