LaFonera Hardware Logo-Removal

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 11:22, 1 April 2007 (edit)
Ndoo (Talk | contribs)
(Alternate Methods)
← Previous diff
Revision as of 11:23, 1 April 2007 (edit) (undo)
Ndoo (Talk | contribs)
(Removal using Metal Polish - Header cleanup)
Next diff →
Line 3: Line 3:
You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera|LaFonera]] / [[LaFonera_Hardware|Hardware]] / Logo-Removal''' You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera|LaFonera]] / [[LaFonera_Hardware|Hardware]] / Logo-Removal'''
-= Removal using Metal Polish =+== Removal using Metal Polish ==
Metal polish is powerful enough to abrade metal, which means that the solvent is also strong enough to dissolve the paint of the FON logo on La Fonera. Metal polish is powerful enough to abrade metal, which means that the solvent is also strong enough to dissolve the paint of the FON logo on La Fonera.
-Things needed:+=== Things needed ===
* Metal polish (stainless steel cleaner, brasso, etc.) * Metal polish (stainless steel cleaner, brasso, etc.)
* Kitchen paper (thick tissue paper works fine too) * Kitchen paper (thick tissue paper works fine too)
-Method:+=== Method ===
# Dampen kitchen paper with metal polish # Dampen kitchen paper with metal polish
# Rub soaked portion of kitchen paper over FON logo # Rub soaked portion of kitchen paper over FON logo

Revision as of 11:23, 1 April 2007

You are here: DD-WRT wiki mainpage / LaFonera / Hardware / Logo-Removal

Contents

Removal using Metal Polish

Metal polish is powerful enough to abrade metal, which means that the solvent is also strong enough to dissolve the paint of the FON logo on La Fonera.

Things needed

  • Metal polish (stainless steel cleaner, brasso, etc.)
  • Kitchen paper (thick tissue paper works fine too)

Method

  1. Dampen kitchen paper with metal polish
  2. Rub soaked portion of kitchen paper over FON logo
  3. Logo will dissolve into polish - Use a fresh piece of kitchen paper if it is too stained
  4. DO NOT get any paint onto the WLAN, LAN and POWER labels, or they'll come off too
  5. Clean up any leftover polish with a DRY kitchen paper
  6. Clean up trace polish (or else it may degrade the plastic) using a damp kitchen towel (dampen with water)
  7. Enjoy your unbranded Fonera!

Alternate Methods

See the discussion page for previously suggested methods which may not be as effective.