LaFonera Hardware Disassembling
From DD-WRT Wiki
You are here: DD-WRT wiki mainpage / LaFonera / Hardware / Disassembling
Inside the fon router
As the router is small, it does not provide any additional LAN ports. One WAN port , DC input and the External RP-SMA connector with antenna can be seen in the picture below.
Disassembling the LaFonera router
Remove the mounting screws that are located under the rubber paddings:
Remove the antenna:
Pry off the white casing using a flathead driver:
Below you can see the top side of the main board. It seems to have one additonal antenna soldering point.
There is a serial port connector next to the two capacitors.
The bottom side of the board:
Refrences
- Hardware Specification
- http://sodoityourself.com/inside-the-fon-router/ do it yourself LaFonera guide
- More LaFonera disassembly in High-Res
this page was made by wildblue!