LaFonera Hardware Disassembling

From DD-WRT Wiki

Revision as of 02:15, 2 March 2007 by Wildblue (Talk | contribs)
Jump to: navigation, search

You are here: DD-WRT wiki mainpage / LaFonera / Hardware / Disassembling

Inside the fon router

Image:LaFonera Hardware Disassembling 01.png Before christmas foneros was giving away free routers to countries in europe. The router itself is tiny: it fits nicely in the palm of my hands (and i have small hands).

Included is a 5 v Ac/Dc converter and a simple user manual.

Anxious to see what was inside i started dissassembling. On the way i took some pictures for you all to see so read on!


As the router is small, it does not provide any additional LAN ports. One WAN port , DC input and the External RP-SMA connector with antenna can be seen in the picture below.

Image:LaFonera Hardware Disassembling 02.jpg


Disassembling the LaFonera router

Remove the mounting screws that are located under the rubber paddings:

Image:LaFonera Hardware Disassembling 03.jpg


Remove the antenna:

Image:LaFonera Hardware Disassembling 04.jpg


Pry off the white casing using a flathead driver:

Image:LaFonera Hardware Disassembling 05.jpg


Below you can see the top side of the main board. It seems to have one additonal antenna soldering point.

There is a serial port connector next to the two capacitors.

Image:LaFonera Hardware Disassembling 06.jpg


The bottom side of the board:

Image:LaFonera Hardware Disassembling 07.jpg


Refrences