LaFonera Hardware Disassembling

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 08:20, 22 March 2007 (edit)
Guerby (Talk | contribs)
(add link to hw spec)
← Previous diff
Current revision (12:05, 14 May 2010) (edit) (undo)
Glenn (Talk | contribs)
(-cat)
 
(8 intermediate revisions not shown.)
Line 1: Line 1:
-[[Category:LaFonera]]+ 
-[[Category:LaFonera_Hardware]]+[[Category:LaFonera_Hardware_(en)]]
-You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera|LaFonera]] / [[LaFonera_Hardware|Hardware]] / Disassembling'''+You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[LaFonera_(en)|LaFonera]] / [[:Category:LaFonera_Hardware_(en)|Hardware]] / Disassembling'''
== Inside the fon router== == Inside the fon router==
Line 55: Line 55:
-==Refrences==+==References==
-* [[LaFonera_Info_Hardware-Specifications|Harware Specification]]+* [[LaFonera_Info_Hardware-Specifications|Hardware Specification]]
* http://sodoityourself.com/inside-the-fon-router/ do it yourself LaFonera guide * http://sodoityourself.com/inside-the-fon-router/ do it yourself LaFonera guide
- 

Current revision

You are here: DD-WRT wiki mainpage / LaFonera / Hardware / Disassembling

[edit] Inside the fon router

Image:LaFonera Hardware Disassembling 01.png Before christmas foneros was giving away free routers to countries in europe. The router itself is tiny: it fits nicely in the palm of my hands (and i have small hands).

Included is a 5 v Ac/Dc converter and a simple user manual.

Anxious to see what was inside i started dissassembling. On the way i took some pictures for you all to see so read on!


As the router is small, it does not provide any additional LAN ports. One WAN port , DC input and the External RP-SMA connector with antenna can be seen in the picture below.

Image:LaFonera Hardware Disassembling 02.jpg


[edit] Disassembling the LaFonera router

Remove the mounting screws that are located under the rubber paddings:

Image:LaFonera Hardware Disassembling 03.jpg


Remove the antenna:

Image:LaFonera Hardware Disassembling 04.jpg


Pry off the white casing using a flathead driver:

Image:LaFonera Hardware Disassembling 05.jpg


Below you can see the top side of the main board. It seems to have one additonal antenna soldering point.

There is a serial port connector next to the two capacitors.

Image:LaFonera Hardware Disassembling 06.jpg


The bottom side of the board:

Image:LaFonera Hardware Disassembling 07.jpg


[edit] References




this page was made by wildblue!