LaFonera Hardware Disassembling
From DD-WRT Wiki
(Difference between revisions)
Revision as of 16:25, 7 May 2008 (edit) Zbarnes (Talk | contribs) (→Refrences) ← Previous diff |
Revision as of 18:15, 6 December 2008 (edit) (undo) Interval (Talk | contribs) m (→Refrences) Next diff → |
||
Line 57: | Line 57: | ||
- | == | + | ==References== |
* [[LaFonera_Info_Hardware-Specifications|Hardware Specification]] | * [[LaFonera_Info_Hardware-Specifications|Hardware Specification]] |
Revision as of 18:15, 6 December 2008
You are here: DD-WRT wiki mainpage / LaFonera / Hardware / Disassembling
Inside the fon router
As the router is small, it does not provide any additional LAN ports. One WAN port , DC input and the External RP-SMA connector with antenna can be seen in the picture below.
Disassembling the LaFonera router
Remove the mounting screws that are located under the rubber paddings:
Remove the antenna:
Pry off the white casing using a flathead driver:
Below you can see the top side of the main board. It seems to have one additonal antenna soldering point.
There is a serial port connector next to the two capacitors.
The bottom side of the board:
References
- Hardware Specification
- http://sodoityourself.com/inside-the-fon-router/ do it yourself LaFonera guide
this page was made by wildblue!