JTAG pinouts
From DD-WRT Wiki
Revision as of 08:12, 22 January 2010 (edit) Alvin (Talk | contribs) m (WRT54Gv2 and Parallelport wiggler layout) ← Previous diff |
Revision as of 07:30, 23 January 2010 (edit) (undo) Alvin (Talk | contribs) m (added Asus RT-N16) Next diff → |
||
Line 2: | Line 2: | ||
__TOC__ | __TOC__ | ||
+ | |||
+ | ==Asus WL500g Deluxe== | ||
+ | <center>[[Image:Asus_rt-n16_JTAG.png]] | ||
+ | </center> | ||
+ | <br><br><br> | ||
==Asus WL500g Deluxe== | ==Asus WL500g Deluxe== | ||
<center>[[Image:Asus_wl500g_jtag.jpg]] | <center>[[Image:Asus_wl500g_jtag.jpg]] | ||
</center> | </center> | ||
- | + | <br><br><br> | |
==Belkin_F5D7230_v1000== | ==Belkin_F5D7230_v1000== |
Revision as of 07:30, 23 January 2010
Asus WL500g Deluxe
Asus WL500g Deluxe
Belkin_F5D7230_v1000
To flash use latest wrt54g v4.8, with these parameters: /fc:29 /nocwd /nobreak /noreset
watch out for RA11 (under the minipci)
Belkin_F5D7231_v1212
Buffalo WBR-G54
jtag is pins 1-12 (normal jtag pinout: 3: TDI, 5: TDO, 7: TMS, 9: TCK)
| |mini-pci card
| |_______________
| 2 12 JP1
| o o o o o o |o o|
| o o o o o o |o o|
| 1 11 JP2
Buffalo WLA-G54
siehe
[Buffalo WBR-G54]
Buffalo WLA-G54C
Buffalo WVR-G54-NF
Dell Truemobile 2300 v1
Fonera 2200A
Standard v2.6 EJTAG connector:
Linksys WRT300n v2
Linksys WRT54G v2
Motorola WE800G v1
Motorola WR850G v1
Parallel port - TJTAG 3.0.2 - /cable:wiggler
To get the Universal JTAG board, read this forum thread
Philips SNB6500 (v1)
Board before MOD: Image:1-SNB6500 BOARD.jpg Preparation: 1st step Preparation: 1st step First group of pads: Wires connected: Wires flow: Hidden connections: Second group of pads: Wires connected: Final look:
Siemens SE505 v1
see [Belkin_F5D7230_v1000]
Siemens SE505 v2
You will find round Labels on the flash chip with 01, 02, 03
Nice German HowTo: JTAG for SE505 v2
Airlink AR430W
The router follows the MIPS 2.6 EJTAG Specification and has the same PIN information. But on the board the PINS are layed out as
1 2 3 4 5 6 7
14 13 12 11 10 9 8
1 - nTRST
3 - TDI
5 - TDO
7 - TMS
9 - TCK
2, 4, 6, 8, 10 - GND [you only need one GND for JTAG]
You dont need the following pins
11 - nSRST
14 - VCC
12, 13 - N/C
I updated the jtagspi with a 8Meg winbond flash and added information if you have to fix the code to match your JTAG hardware
jtagspi.tgz with my modifications