Internal device network

From DD-WRT Wiki

Revision as of 14:45, 16 May 2010 by Glenn (Talk | contribs)
Jump to: navigation, search

Your network device's (commonly wrongly known as a "router") has an internal network. The internal network connects the internal physical(=hardware):

  • switch
  • wireless access point

with the:

Via the DD-WRT user interface (or the manufacturers firmware) you can modify how the hardware is logically interconnected with your software services. The software services are serviced by the network processor (ARM, MIPS...). Please note that the possibilities are limited by the software implementation and hardware.

List of non-exhaustive internal software services:

The software network services is connected by you, to physical or logical network interface. The interfaces might be a:

  • physical interfaces might be labelled eth0, eth1...
  • logical might be a bridge (=switch) labelled br0, br1...
  • logical vlan labelled vlan0, vlan1....

and maybe:

The default internal device networks in a non-802.11n network device - specifically the default configuration of a DD-WRT V23-SP2 firmware on a Linksys WRT54G v2. In a network device containing a 802.11n wireless access point the internal numbering of ports, bridges and vlans are different.
The default internal device networks in a non-802.11n network device - specifically the default configuration of a DD-WRT V23-SP2 firmware on a Linksys WRT54G v2. In a network device containing a 802.11n wireless access point the internal numbering of ports, bridges and vlans are different.