Installation

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 06:03, 17 May 2006 (edit)
64.90.50.134 (Talk)
(Flashing the Asus WL500G Deluxe)
← Previous diff
Revision as of 11:36, 18 May 2006 (edit) (undo)
Gerrys (Talk | contribs)
(Flashing the Siemens SE505)
Next diff →
Line 202: Line 202:
==Flashing the Siemens SE505== ==Flashing the Siemens SE505==
-[[Flash Your Siemens SE505, ...]]+ 
 +BrainSlayer said: "DD-WRT v23 (starting from 27/10/05 version) does now officially support the Siemens Gigaset SE505 router. That means you can use the very latest features like WPA2 on this unit too. Due the limited ram of this unit, you cannot use all features at the same time, but from the base it is much better than the original firmware for this Router"
 + 
 + 
 +For flashing the Siemens Gigaset SE505, you have to use the dd-wrt.v23_mini_generic.bin
 +with boot tftp on 192.168.2.1
 +since the Siemens default settings do not fit to the Linksys/dd-wrt ones you have additionally
 +to check your configuration details after flashing.
 + 
 +(From BrainSlayer's note in hwsupport.txt)
 + 
 + 
 +In [http://dd-wrt.gruftie.com/dd-wrtv2/downloads/index.php?path=dd-wrt.v23%2F&download=changelog.txt changelog.txt], the last entry about the SE505 mentions, that the version2 was bricked:
 + 15.11.2005:
 + 0000161 No gzip in 14.11.2005 ?????
 + 0000167 ipkg broken in V23b 14-11-05
 + 0000168 DD-wrt v23 B2 141105 SE505 v2 bricked
 + ...
 + 
 +Could someone give more info about the issue or tell us if dd-wrt has been installed succesfully on any version 2 device?
 + 
 +-----
 +01.mai.2006.
 +I successfully flashed a se505 v2(S30853-S1006-R107-3) with the v23_micro sp1_4.25.06 only the browser buttons on "administration|management" are not working. WDS with WEP is running well at the moment with 2 other WRT54 V23. Other things not tested yet.with v23sp1_04.28.06 buttons on basic-setup are not working - so no adjustment on ip possible. ddt3 at gmx dot net.
 +-----
 +02.mai.2006.
 +Even with v23sp1_2006 micro - 0501 buttons on "administration|management" are still not working. WPA as a AP seems not to work on my se505v2. With wrt54gl V23 it works for reference with my notebook yakumo quicklan USB54 XP-generic-setup. If you flash a new fw with tftp somtimes it apears as 192.168.0.your setup and sometimes as 192.168.1.1 an 192.168.2.1. So change your IP to a suitable subnet and search with ping. ddt3 at gmx dot net.
 +----
 +08.mai.2006.
 +Firmware: DD-WRT v23 SP1-RC1 (05/07/06) micro with se505 v2(S30853-S1006-R107-3) works fine now. all the problems from 1+2.mai2006 are solved so far i see in this short time. ddt3 at gmx dot net.
 +----
 +09.mai.2006.
 +update: wpa-psk and wpa2-psk ist not working with my constelation. i flashed back to the orig. siemens_de_3.02.03 fw. with this wpa-psk is running well with orig. xp setup and with yakumo setup - so seems to be a fw problem ddt3 at gmx dot net.
 +----
 +12.mai.2006.
 +after updating to "dd-wrt.v23 SP1/RC2/micro" wpa-psk and wpa2-psk works with my pc! ddt3 at gmx dot net.
 +----
 +18.mai.2006 with DD-WRT v23 SP1 Final (05/16/06) micro (generic) it works also fine. If the se505v2 dont accept the new parameter after press the save button try to switch off the siemens for a moment and restart your browser (be sure to close all your browser windows).ddt3 at gmx dot net.
 +----
 + 
 + 
 + 
 + 
 +==Related Links==
 + 
 +* [http://wireless.subsignal.org/index.php/Konfiguration_(Siemens) Howto install Freifunk (OLSR) Firmware on the SE505]
 +* [http://www.dslrouter-hilfe.de/home/siemens-reset.php Reset to Default Firmware]
 +* [http://icm-km5.erlm.siemens.de/SRVS/CGI-BIN/webisapi.dll/,/?St=10,E=0000000000011802487,K=7355,Sxi=16,Case=obj(1897) Reset to Default Firmware2(pdf)]
 +* [http://wiki.opennet-initiative.de/index.php/Siemens_SE505 Differences between SE505 version 1 and 2]
 + 
 + 
 +[[Category:English documentation]]
==Flashing Buffalo devices== ==Flashing Buffalo devices==

Revision as of 11:36, 18 May 2006