IPv6 setup Hurricane Electric Tunnel Broker

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 23:27, 4 December 2010 (edit)
HockeyFan4Life (Talk | contribs)
m
← Previous diff
Revision as of 22:34, 3 January 2011 (edit) (undo)
Ac1115 (Talk | contribs)
m (removed "code:" from top of code)
Next diff →
Line 15: Line 15:
You should have an account and tunnel created on the website. This post will not cover that. Install steps are below the script. You should have an account and tunnel created on the website. This post will not cover that. Install steps are below the script.
- Code:+
#*************************** #***************************
#Settings start here #Settings start here

Revision as of 22:34, 3 January 2011

This will...
Set up HE's tunnel broker service.
Automatically finds your wan ip at boot using whatismyip.com
Automatically updates HE's endpoint on boot
Generates a radvd.conf on boot, and applies it automatically
Generates a executable file that can be used with cron to keep HE's endpoint up-to-date if you have a dynamic IP


My setup for reference.
Optimum Online Cable ISP
WRT610Nv2
v24-sp2 (Aug 12, 2010)
build 14929

You should have an account and tunnel created on the website. This post will not cover that. Install steps are below the script.


#***************************
#Settings start here
#***************************
#basic connection settings
SERVER_IP4_ADDR="enter ip here"
CLIENT_IPV6_ADDR="enter ip here"
ROUTED_64_ADDR="enter ip here"
#account info to auto update endpoint
USERID="enter the long hex code - NOT text username"
PASSWD="plain text password"
TUNNELID="your numeric GLOBAL tunnel id"
#####Optional/Advanced Settings######
#logging settings (set to /dev/null for no logging)
STARTUP_SCRIPT_LOG_FILE="/tmp/ipv6.log"
CRON_STATUS_LOG_FILE="/tmp/lastHEUpdate.log"
#Generated files paths
CRON_JOB_FILE="/tmp/report.sh"
RADVD_CONFIG="/tmp/radvd.conf"
#***************************
#Settings end here
#***************************
insmod ipv6
sleep 10
#get a hash of the plaintext password
MD5PASSWD=`echo -n $PASSWD | md5sum | sed -e 's/  -//g'`
#cut out the "/64" if user typed it in
ROUTED_64_ADDR=`echo $ROUTED_64_ADDR|cut -f1 -d/`
SERVER_IP4_ADDR=`echo $SERVER_IP4_ADDR|cut -f1 -d/`
CLIENT_IPV6_ADDR=`echo $CLIENT_IPV6_ADDR|cut -f1 -d/`
#update HE endpoint
echo -e wget -q "\042http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&pass=$MD5PASSWD&user_id=$USERID&tunnel_id=$TUNNELID\042" -O $CRON_STATUS_LOG_FILE  >$CRON_JOB_FILE
chmod +x $CRON_JOB_FILE
wget -q "http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&pass=$MD5PASSWD&user_id=$USERID&tunnel_id=$TUNNELID" -O $STARTUP_SCRIPT_LOG_FILE
#get wan ip for our own use
WANIP=`wget http://whatismyip.com/automation/n09230945.asp -O - 2>/dev/null`
echo "External IP:" $WANIP >> $STARTUP_SCRIPT_LOG_FILE
if [ -n $WANIP ]
then
echo "configuring tunnel" >> $STARTUP_SCRIPT_LOG_FILE
# The following commands are straight from HE's website
modprobe ipv6
ip tunnel add he-ipv6 mode sit remote $SERVER_IP4_ADDR local $WANIP ttl 255
ip link set he-ipv6 up
ip addr add $CLIENT_IPV6_ADDR/64 dev he-ipv6
ip route add ::/0 dev he-ipv6
ip -f inet6 addr
TEMP_ADDR=`echo $ROUTED_64_ADDR'1'`
# These commands aren't on HE's website, but they're necessary for the tunnel to work
ip -6 addr add $TEMP_ADDR/64 dev br0
ip route add 2000::/3 dev he-ipv6
#Enable IPv6 forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
# make sure to accept proto-41
iptables -I INPUT 2 -p ipv6 -i vlan1 -j ACCEPT
#make sure to not NAT proto-41
iptables -t nat -A POSTROUTING --proto ! 41 -o eth0 -j MASQUERADE
echo "starting radvd" >> $STARTUP_SCRIPT_LOG_FILE
#creating radvd.conf
echo "#generated by startup script" > $RADVD_CONFIG
echo "interface br0 {" >> $RADVD_CONFIG
echo "AdvSendAdvert on;" >> $RADVD_CONFIG
echo "prefix "$ROUTED_64_ADDR"/64 {" >> $RADVD_CONFIG
echo "AdvOnLink on;" >> $RADVD_CONFIG
echo "AdvAutonomous on;" >> $RADVD_CONFIG
echo "AdvRouterAddr on;" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
echo "};" >> $RADVD_CONFIG
radvd -C $RADVD_CONFIG &
fi

Installation steps:

  • Change the settings in the beginning of the above script to your settings.
  • Copy personalized script into Administration > Commands. Save as startup script
  • Go into Administration > Management
  • enable IPv6 and radvd. Leave the config box empty
  • (Optional) enable cron and enter this into "Additional Cron Jobs"

Code:

* 4 * * * root /tmp/report.sh

The above line will auto update the endpoint daily at 4am. Change to personal taste

  • Apply settings, wait for reboot

Test the setup with e.g.:
http://ipv6.google.com
http://aaaa.test-ipv6.com/

Forum link:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=81060

Example of Basic Connection settings

SERVER_IP4_ADDR="0.0.0.0"
CLIENT_IPV6_ADDR="0000:000:0000:000::0"
ROUTED_64_ADDR="0000:000:0000:000::0"