IPTV - blocking multicast on WIFI

From DD-WRT Wiki

Revision as of 22:22, 17 February 2009 by Cyrano63 (Talk | contribs)
Jump to: navigation, search

How to set up IPTV with DD-WRT: This section explains how to use the DD-WRT GUI to configure DD-WRT supporting multicast IPTV traffic while at the same time anable some LAN ports and Wireless Clients working in parallel.

This works on my WRT54GL V1.1 connecting to T-Home, without using a separate Router for the multicast traffic.

In the sample configuration, the TV media receiver is connected to LAN Port 4, and the router Ip is 192.168.1.1. Other configurations work accordingly.


Contents

Step 1:

Ensure that you are at least on DD-WRT 24v1 Firmware, otherwise download the most recent release.


Step 2:

Connect the TV media receiver to Port 4. Connect other LAN connections to Ports 1,2,3


Step 3:

Disable (uncheck) "Filter Multicast" on Security-->Firewall


Step 4:

In Wireless-->Basic setting, set "Network Configuration" to "Unbridged", "Multicast forwarding" to "disabled", and provide 192.168.3.1 with subnet mask 255.255.255.0 as the IP address for Wireless connections


Step 5:

In Setup-->VLANs, check the "tagged" checkboxes for Ports 1,2,3. Then, check the three accoring checkboxes in the VLAN 7 row, uncheck them in the VLAN 0 row, and finally uncheck the "tagged" checkboxes.  


Step 6:

Apply the settings and reboot the router


Step 7:

In Setup-->Networking, check "Unbridged" for "Network Configuration vlan7", "Multicast forward" to "disable", and, below this entry, provide IP number 192.168.2.1 with subnet mask 255.255.255.0 as the IP address (will be applied for the LAN Ports 1,2,3)


Step 8:

In Setup-->Networking, add two DHCP Servers in the bottom area, one for vlan7, one for eth1 (keep the standard settign for the other fields)


Step 9:

Aplly all changes, and reboot the router

Step 10:

Enjoy TV, LAN, and Wireless simultaneously