IPTV - blocking multicast on WIFI
From DD-WRT Wiki
Revision as of 16:14, 30 June 2011 (edit) Sash (Talk | contribs) (→Block Multicast via Firewall) ← Previous diff |
Revision as of 16:15, 30 June 2011 (edit) (undo) Sash (Talk | contribs) (→Block Multicast via Firewall) Next diff → |
||
Line 35: | Line 35: | ||
= Block Multicast via Firewall= | = Block Multicast via Firewall= | ||
- | Fist you have to load the layer2 firewall modules. Then | + | Fist you have to load the layer2 firewall modules. Then put in your WIFI interface into the iptables rule ande insert everything into the firewall startup |
insmod ebtables | insmod ebtables |
Revision as of 16:15, 30 June 2011
Contents |
Introduction
This section explains how to use the DD-WRT GUI to configure DD-WRT supporting multicast IPTV traffic while at the same time enable some LAN ports and Wireless Clients working in parallel.
There are 2 ways to achieve this. The first is to unbridge the LAN area that shouldnt get flooded with mulicast packets. The second (and imho more elegand) way is to block mulicast traffic to the interfaces which doesnt need it.
Assumption
In the sample configuration, the TV media receiver is connected to LAN Port 4, and the router Ip is 192.168.1.1. Other configurations work accordingly.
Prerequisites
- Ensure that you are at least on DD-WRT 24v1 Firmware, otherwise download the most recent release.
- Connect the TV media receiver to Port 4. Connect other LAN connections to Ports 1,2,3
Allow for multicast traffic
- Disable (uncheck) "Filter Multicast" on Security-->Firewall
Disable multicast traffic to reach the Wireless adapter
- In Wireless-->Basic setting, set "Network Configuration" to "Unbridged", and "Multicast forwarding" to "disabled".
- Provide 192.168.3.1 with subnet mask 255.255.255.0 as the IP address for Wireless connections
Setup an additional VLAN
- In Setup-->VLANs, check the "tagged" checkboxes for Ports 1,2,3. Then, check the three accoring checkboxes in the VLAN 7 row, uncheck them in the VLAN 0 row, and finally uncheck the "tagged" checkboxes.
- Apply the settings and reboot the router
Disable multicast traffic to reach the LAN Ports 1,2,3
- In Setup-->Networking, check "Unbridged" for "Network Configuration vlan7", "Multicast forward" to "disable".
- Below this entry, provide IP number 192.168.2.1 with subnet mask 255.255.255.0 as the IP address
Enable DHCP for the additional local Networks and final steps
- In Setup-->Networking, add two DHCP Servers in the bottom area, one for vlan7, one for eth1 (keep the standard settign for the other fields)
- Apply all changes, and reboot the router
Block Multicast via Firewall
Fist you have to load the layer2 firewall modules. Then put in your WIFI interface into the iptables rule ande insert everything into the firewall startup
insmod ebtables insmod ebtable_filter ebtables -A FORWARD -o "interface to block" -d Multicast -j DROP
Finally, enjoy TV, LAN, and Wireless simultaneously