How To Flash the WRT54GS v7

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 06:46, 14 March 2008 (edit)
Keidian (Talk | contribs)

← Previous diff
Current revision (05:10, 14 October 2009) (edit) (undo)
DHC DarkShadow (Talk | contribs)
(Redirecting to Linksys WRT54GS v7.0 & 7.2)
 
(26 intermediate revisions not shown.)
Line 1: Line 1:
-I suggest not doing these instructions for the time being, the vxworkskiller stage simply made a brick out of my router instead of anything useful - Keidian+#REDIRECT [[Linksys WRT54GS v7.0 & 7.2]]
- +
- +
-'''How To Flash the WRT54GS v7''' (from [http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC4/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/WRT54Gv8,%20WRT54GSv7/flashing.txt flashing.txt])+
- +
-1. Configure your local lan ethernet address to 192.168.1.100 and connect your local ethernet to your WRT54GSv7 on one of the 4 switch ports.+
- +
-2. Plugoff the power cord from the WRT54GSv7.+
- +
-3. Push the reset button while replugin the power cord and hold the button for about 20 seconds.+
- +
-4. Open your browser and open <nowiki>http://192.168.1.1</nowiki>+
- +
-5. Use the firware upgrade dialog to flash [http://www.dd-wrt.com/dd-wrtv2/downloads/others/tornado/GSv7/vxworkskillerGSv7-v3.bin vxworkskillerGSv7-v3.bin]+
- +
-6. After the dialog is shown that you need to plugoff the power cord, remove the power cord and replug it in.+
- +
-7. Wait for about 2 minutes.+
- +
-8. Plugoff the power cord again and replug it in.+
- +
-9. Enter "tftp -i 192.168.1.1 put [http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC5/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/WRT54Gv8,%20WRT54GSv7/dd-wrt.v24_micro_wrt54gv8.bin dd-wrt.v24_micro_wrt54gv8.bin]" on your local windows console and press enter+
-(for linux, tftp 192.168.1.1; mode octet;put [http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC5/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/WRT54Gv8,%20WRT54GSv7/dd-wrt.v24_micro_wrt54gv8.bin dd-wrt.v24_micro_wrt54gv8.bin]).+
- +
-10. The file will now be transfered to your router and be flashed. after this is done, dd-wrt will automaticly boot and you can reach your router at http://192.168.1.1.+

Current revision

  1. REDIRECT Linksys WRT54GS v7.0 & 7.2