From DD-WRT Wiki
(Difference between revisions)
Revision as of 00:36, 16 October 2007 (edit) G sintornillos (Talk | contribs) m ← Previous diff |
Current revision (05:10, 14 October 2009) (edit) (undo) DHC DarkShadow (Talk | contribs) |
(34 intermediate revisions not shown.) |
Line 1: |
Line 1: |
- | '''How To Flash the WRT54GS v7''' (from [http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC4/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/WRT54Gv8,%20WRT54GSv7/flashing.txt flashing.txt]) | + | #REDIRECT [[Linksys WRT54GS v7.0 & 7.2]] |
- | | + | |
- | 1. Configure your local lan ethernet address to 192.168.1.100 and connect your local ethernet to your WRT54GSv7 on one of the 4 switch ports. | + | |
- | | + | |
- | 2. Plugoff the power cord from the WRT54GSv7. | + | |
- | | + | |
- | 3. Push the reset button while replugin the power cord and hold the button for about 20 seconds. | + | |
- | | + | |
- | 4. Open your browser and open <nowiki>http://192.168.1.1</nowiki> | + | |
- | | + | |
- | 5. Use the firware upgrade dialog to flash [http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC4/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/WRT54Gv8,%20WRT54GSv7/vxworkskillerGSv7.bin vxworkskillerGSv7.bin]. | + | |
- | | + | |
- | 6. After the dialog is shown that you need to plugoff the power cord, remove the power cord and replug it in. | + | |
- | | + | |
- | 7. Wait for about 1 - 2 minutes. | + | |
- | | + | |
- | 8. Plugoff the power cord again and replug it in. | + | |
- | | + | |
- | 9. Enter "tftp -i 192.168.1.1 put [http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC4/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/WRT54Gv8,%20WRT54GSv7/dd-wrt.v24_micro_wrt54gv8.bin dd-wrt.v24_micro_wrt54gv8.bin]" on your local windows console and press enter | + | |
- | (for linux, tftp 192.168.1.1; mode octet;put [http://www.dd-wrt.com/dd-wrtv2/downloads/release%20candidates/DD-WRT%20v24%20RC4/GENERIC%20BROADCOM%20(Linksys,%20Asus%20etc.)/WRT54Gv8,%20WRT54GSv7/dd-wrt.v24_micro_wrt54gv8.bin dd-wrt.v24_micro_wrt54gv8.bin]). | + | |
- | | + | |
- | 10. The file will now be transfered to your router and be flashed. after this is done, dd-wrt will automaticly boot and you can reach your router at http://192.168.1.1. | + | |
Current revision
- REDIRECT Linksys WRT54GS v7.0 & 7.2