Flash your WRT54G or WRT54GS v5 series (v5, v5.1, v6)
From DD-WRT Wiki
Revision as of 23:00, 22 June 2006 (edit) 219.93.174.105 (Talk) ← Previous diff |
Current revision (04:59, 14 June 2010) (edit) (undo) Leangjia (Talk | contribs) |
||
(45 intermediate revisions not shown.) | |||
Line 1: | Line 1: | ||
- | + | {{languages|Flash your WRT54G or WRT54GS v5 series (v5, v5.1, v6)}} | |
+ | __TOC__ | ||
- | + | ===For the WRT54G v5, v5.1, and v6 ONLY=== | |
- | + | http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX#v5_and_v6 | |
- | + | ===For the WRT54GS v5, v5.1 and v6 ONLY=== | |
- | + | '''SERIOUS WARNING -- NO REVERSION TO VXWORKS ON THESE UNITS:''' At the moment for WRT54GS units this is a one way operation. No reversion back to VxWorks is available. I never got around to creating the GS reversion firmware. It could EASILY be created by someone using the tools I've written and the documentation here. A person once sent me a GS router hoping I might, but I didn't get to it and now no longer have that router. If someone would like to send me another GS unit, I will maybe get around to creating the reversion firmware. Also, if you'd like to donate other routers, feel free. Note that I make absolutely no guarantees that I'll complete anything though. | |
- | + | ||
- | + | Copied from Bitsum | |
- | + | http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX#v5_and_v6_2 | |
- | + | === Links to v5 and v6 Flash Instructions === | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | < | + | http://www.bitsum.com/openwiking/owbase/ow.asp?WRT54G5%5FCFE <br /> |
+ | http://www.scorpiontek.org/portal/content/view/27/36 | ||
- | <li>Erase the flash (you did backup your :wholeflash, right?) with 'wrt54g -erase:wholeflash'. This will only take a minute. | ||
- | <li>Now your canvas is blank. From here on, you will need to append '/noreset' to your commands. It's time to flash the CFE.BIN you downloaded earlier (It's originally from a wap54g v3). Use the command 'wrt54g -flash:cfe /noreset'. This will also take about 10 minutes. Note that it is possible to flash the entire firmware to the flash using the debricker tool, but this will take '''a very long time''' (like 90 minutes). For this reason it is recommended to use the CFE.BIN then just tftp the whole image over after. | ||
- | + | === Enable 16 MB RAM === | |
- | + | '''ATTENTION: WRT54gS ONLY!!!!!''' Doing this in your WRT54G will BRICK your router! | |
- | + | See [[Enable_16MB_RAM_on_WRT54GS_v5]] | |
- | + | [[Category:Linksys guides]] | |
- | + | ||
- | + | ||
- | + | ||
- | [[Category: | + | |
- | + | ||
- | + |
Current revision
English • Deutsch • Español • Français • Italiano • 日本語 • Polski • Português • Русский • Svenska • 中文(中国大陆) • 中文(台灣) • |
Contents |
[edit] For the WRT54G v5, v5.1, and v6 ONLY
http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX#v5_and_v6
[edit] For the WRT54GS v5, v5.1 and v6 ONLY
SERIOUS WARNING -- NO REVERSION TO VXWORKS ON THESE UNITS: At the moment for WRT54GS units this is a one way operation. No reversion back to VxWorks is available. I never got around to creating the GS reversion firmware. It could EASILY be created by someone using the tools I've written and the documentation here. A person once sent me a GS router hoping I might, but I didn't get to it and now no longer have that router. If someone would like to send me another GS unit, I will maybe get around to creating the reversion firmware. Also, if you'd like to donate other routers, feel free. Note that I make absolutely no guarantees that I'll complete anything though.
Copied from Bitsum
http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX#v5_and_v6_2
[edit] Links to v5 and v6 Flash Instructions
http://www.bitsum.com/openwiking/owbase/ow.asp?WRT54G5%5FCFE
http://www.scorpiontek.org/portal/content/view/27/36
[edit] Enable 16 MB RAM
ATTENTION: WRT54gS ONLY!!!!! Doing this in your WRT54G will BRICK your router!