Flash Your Siemens SE505, ...

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 05:51, 4 March 2007 (edit)
Proflan (Talk | contribs)

← Previous diff
Current revision (18:09, 14 August 2019) (edit) (undo)
Santurysim (Talk | contribs)
m (Fixed double redirect)
 
(One intermediate revision not shown.)
Line 1: Line 1:
-This describes how to flash your Siemens SE505 Router using tftp and Suse Linux+#redirect [[Siemens SE505]]
- +
-=Preparation=+
-==Install the tftp package on your Linux Box ==+
-Trivial File Transfer Protocol (TFTP) is a very simple Filetransferprotocol. +
-Using Suse Linux you can do this by yast or typing as root user:+
- +
- #smart install tftp+
- +
-==Create a virtual Network Interface on your Linux Box==+
-Your router can only be flashed from the IP 192.168.2.100. The easiest way is to create a virtual network interface. This can be done by yast oder you simply type as root user:+
- +
- #ifconfig -a eth0:1 192.168.2.100+
- #route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.100 dev eth0:1+
- +
-ifconfig should now print somethinge like:+
- +
- eth0:1 Link encap:Ethernet HWaddr 00:00:00:00:00:00+
- inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0+
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1+
- Interrupt:10 Base address:0xdc00+
- +
-==Restore the Router-IP==+
-If you changed your router's IP, you have to restore the default IP to 192.168.2.1. This can be done by accessing your router via webinterface. +
- +
-=Flashing the router=+
-==Download the new Firmware==+
-Download the new DD-WRT Firmware (generic/mini) and save it to your Linux Box. Remember the directory.+
- +
-==Reboot the Router==+
-This can be done by using the router's webinterface (http://192.168.2.1). Klick the ''reboot'' button in the Management Menu+
- +
-==Immediately start the tftp transfer==+
-After klicking the reboot button you have to start the transfer immediately on your Linux Box. Remember that you have to do this in the directory where the .bin file was saved. +
- +
- #tftp -v 192.168.2.1 -m binary -c put dd-wrt.v23_mini_generic.bin+
- +
-After 5 to 10 minutes you should be able to acces your routers new webinterface.+

Current revision

  1. redirect Siemens SE505