FirewallExample
From DD-WRT Wiki
(Difference between revisions)
Revision as of 01:05, 16 September 2008 (edit) 0chiehchen (Talk | contribs) (New page: <pre> # ---------------------- #--- IPTABLES START --- # ---------------------- # # DEFINES: LAN_IP=$(nvram get lan_ipaddr) WAN_IP=$(nvram get wan_ipaddr) # --- # Create ALL_ACCEPT chai...) ← Previous diff |
Revision as of 01:09, 16 September 2008 (edit) (undo) 0chiehchen (Talk | contribs) Next diff → |
||
Line 1: | Line 1: | ||
+ | |||
+ | Please edit the following rules under your local editor and cut-and-paste these rules into DD-WRT inside Administration Tab -> Commands -> Command Shell box. Click Save Firewall after you are done. | ||
+ | |||
<pre> | <pre> | ||
# ---------------------- | # ---------------------- |
Revision as of 01:09, 16 September 2008
Please edit the following rules under your local editor and cut-and-paste these rules into DD-WRT inside Administration Tab -> Commands -> Command Shell box. Click Save Firewall after you are done.
# ---------------------- #--- IPTABLES START --- # ---------------------- # # DEFINES: LAN_IP=$(nvram get lan_ipaddr) WAN_IP=$(nvram get wan_ipaddr) # --- # Create ALL_ACCEPT chain: iptables -N ALL_ACCEPT iptables -P ALL_ACCEPT ACCEPT # Insert ALL_ACCEPT chain on top of INPUT rules: iptables -I INPUT -j ALL_ACCEPT # Create NAT_ACCEPT chain: iptables -N NAT iptables -P NAT ACCEPT # Insert NAT chain on top of INPUT and FORWARD rules: iptables -I INPUT -j NAT iptables -I FORWARD -j NAT # --- # private subnets (anything FROM these subnets) iptables -A ALL_ACCEPT -s 192.168.0.0/16 -j ACCEPT # Allowing any remote IP subnets to access DD-WRT: iptables -A ALL_ACCEPT -s xxx.xxx.xxx.xxx -j ACCEPT # --- # WebAdmin (please disable DD-WRT Remote Access feature from the web interface if you are only allowing the above IP's) iptables -t nat -I PREROUTING -p tcp -d $WAN_IP --dport 8080 -j DNAT --to-destination $LAN_IP:443 # WebAdmin (Allow from all IP's) #iptables -t nat -I PREROUTING -p tcp -d $WAN_IP --dport 8080 -j DNAT --to $LAN_IP:443 #iptables -I NAT -p tcp -d $WAN_IP --dport 443 -j ACCEPT # SSH #iptables -t nat -I PREROUTING -p tcp -m tcp -d $WAN_IP --dport 2122 -j DNAT --to-destination 192.168.1.21:22 # SSH (Allow from all IP's) #iptables -t nat -I PREROUTING -p tcp -m tcp -d $WAN_IP --dport 2122 -j DNAT --to-destination 192.168.1.21:22 #iptables -I NAT -p tcp -d 192.168.1.21 --dport 22 -j ACCEPT # --- # SERVER ssh for servers inside DD-WRT network (you can migrate your rules from the DD-WRT Port Forwarding rules here if you are only allowing access from above IP's) iptables -t nat -I PREROUTING -p tcp -d $WAN_IP --dport 22 -j DNAT --to-destination 10.1.1.30:22 iptables -I NAT -p tcp -d 10.1.1.30 --dport 22 -j ACCEPT # --------------------- #--- IPTABLES END --- # ---------------------