External SSH

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 19:53, 17 February 2007 (edit)
Whiteboy (Talk | contribs)

← Previous diff
Revision as of 16:46, 7 April 2008 (edit) (undo)
Soulstace (Talk | contribs)
m
Next diff →
Line 1: Line 1:
-SSH access from Internet +SSH access from Internet
==Ensure SSH Enabled== ==Ensure SSH Enabled==
-# Goto the ''Administration'' tab and the ''Services'' sub-tab on the [[Web_Interface]]+# Goto the ''Administration'' tab and the ''Services'' sub-tab on the [[Web Interface]]
# Enable "SSHd" is under the section titled "Secure Shell" # Enable "SSHd" is under the section titled "Secure Shell"
-# Choose an appropriate port (The default is 22, but is recommended you change to a non-standard port above 1024 because of security)+# Choose an appropriate port (The default is 22, but it is recommended that you change it to a non-standard port above 1024 for security reasons)
# Apply Settings if needed # Apply Settings if needed
==Enable Remote Access== ==Enable Remote Access==
-# Goto the ''Administration'' tab and the ''Management'' sub-tab on the [[Web_Interface]]+# Goto the ''Administration'' tab and the ''Management'' sub-tab on the [[Web Interface]]
# Enable "SSH Management" under the section titled "Remote Access" # Enable "SSH Management" under the section titled "Remote Access"
# Apply Settings # Apply Settings
==Disabling Remote Access== ==Disabling Remote Access==
-# Goto the ''Administration'' tab and the ''Management'' sub-tab on the [[Web_Interface]]+# Goto the ''Administration'' tab and the ''Management'' sub-tab on the [[Web Interface]]
# Disable "SSH Management" under the section titled "Remote Access" # Disable "SSH Management" under the section titled "Remote Access"
# Apply Settings # Apply Settings

Revision as of 16:46, 7 April 2008

SSH access from Internet

Contents

Ensure SSH Enabled

  1. Goto the Administration tab and the Services sub-tab on the Web Interface
  2. Enable "SSHd" is under the section titled "Secure Shell"
  3. Choose an appropriate port (The default is 22, but it is recommended that you change it to a non-standard port above 1024 for security reasons)
  4. Apply Settings if needed

Enable Remote Access

  1. Goto the Administration tab and the Management sub-tab on the Web Interface
  2. Enable "SSH Management" under the section titled "Remote Access"
  3. Apply Settings

Disabling Remote Access

  1. Goto the Administration tab and the Management sub-tab on the Web Interface
  2. Disable "SSH Management" under the section titled "Remote Access"
  3. Apply Settings

References