D-Link DIR-880L

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 04:48, 3 June 2023 (edit)
Kernel-panic69 (Talk | contribs)
((New Device Wiki, added as much content to start off with))
← Previous diff
Revision as of 20:13, 3 June 2023 (edit) (undo)
Kernel-panic69 (Talk | contribs)
(Prerequisites - (add note and links regarding known good initial flash build))
Next diff →
Line 68: Line 68:
==Prerequisites== ==Prerequisites==
'''<span style="color:#ff0000">WARNING</span>:''' There was a period of time that there were specific factory-to-ddwrt.bin files required; this '''''should''''' be fixed in current releases. If flashing current release factory-to-ddwrt.bin files results in a boot loop or brick, please refer to the Recovery section below to enter Emergency Room to flash a known good file from [https://app.box.com/s/b4v1s342ef2dpd52j02lqtuzi1oiipco/folder/42086693204 here]. '''<span style="color:#ff0000">WARNING</span>:''' There was a period of time that there were specific factory-to-ddwrt.bin files required; this '''''should''''' be fixed in current releases. If flashing current release factory-to-ddwrt.bin files results in a boot loop or brick, please refer to the Recovery section below to enter Emergency Room to flash a known good file from [https://app.box.com/s/b4v1s342ef2dpd52j02lqtuzi1oiipco/folder/42086693204 here].
 +'''NOTE:''' [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=323436 03-05-2020-r42617] is a known good initial flash build. See [https://forum.dd-wrt.com/forum/viewtopic.php?t=268579&postdays=0&postorder=asc&start=381]<br>
'''NOTE:''' See [[Firmware_FAQ#Which_router_should_I_buy.3F|Where do I download firmware?]] for information on where to find firmware images. '''NOTE:''' See [[Firmware_FAQ#Which_router_should_I_buy.3F|Where do I download firmware?]] for information on where to find firmware images.
*Download the ''factory-to-ddwrt.bin'' and ''dir880-webflash.bin'' files in the ''dlink-dir880l'' from [https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/ the current release] folder. *Download the ''factory-to-ddwrt.bin'' and ''dir880-webflash.bin'' files in the ''dlink-dir880l'' from [https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/ the current release] folder.

Revision as of 20:13, 3 June 2023



Contents


Introduction

Hardware Specifications

FCC ID: KA2IR880LA1
IC ID: 4216A-IR880LA1
CPU1: Broadcom BCM4708A0 (800 MHz, 2 cores)
FLA1: 128 MB (Spansion S34ML01G100TFI00)
RAM1: 256 MB (EtronTech EM6GD16EWXC-15H)
USB ports: 1xUSB 3.0, 1xUSB 2.0
WI1 chip1: Broadcom BCM4360
WI1 802.11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI2 chip1: Broadcom BCM4360
WI2 802.11 protocols: bgn
WI2 MIMO config: 3x3:3
ETH chip1: Broadcom BCM4708A0
Switch: Broadcom BCM4708A0
LAN ports: 4x1G
WAN ports: 1x1G

Installation

Prerequisites

WARNING: There was a period of time that there were specific factory-to-ddwrt.bin files required; this should be fixed in current releases. If flashing current release factory-to-ddwrt.bin files results in a boot loop or brick, please refer to the Recovery section below to enter Emergency Room to flash a known good file from here. NOTE: 03-05-2020-r42617 is a known good initial flash build. See [1]
NOTE: See Where do I download firmware? for information on where to find firmware images.

  • Download the factory-to-ddwrt.bin and dir880-webflash.bin files in the dlink-dir880l from the current release folder.

Flash from OEM factory firmware

Flash from D-Link Emergency Room

Upgrading DD-WRT

Prerequisites

NOTE: See Where do I download firmware? for information on where to find firmware images.

Procedure

Recovery

D-Link Forums -> Emergency Flashing HOW-TO

Useful information, Further reading, Links